























By buying this product you can collect up to 1264 Citimarine points. Your cart will total 1264 points that will be converted into a voucher of $126.40 towards your next purchase! Must be logged in to collect points.
Phasor 9.5 kW Diesel Marine Generator - 9.5kW (60 Hz) - 1800 RPM - Standard Series - K3-9.5kW
Phasor 9.5 KW Marine Generator at 60 HZ - 8.0 KW at 50 HZ. Kubota Diesel Engine, Single Bearing Direct Coupled Generator with 1% Solid-State Voltage Regulation and Low 1,800 RPM Operating Speed. Also, counts with a Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure. 5-Year Limited Warranty.
Part Number: K3-9.5kW
Click here for details
Phasor - K3-9.5kW Kubota Diesel Engine - Marine Generator - 9.5 kW (60 Hz) Marine Generator
Standard Features
- Kubota Diesel Engine
-
Single Bearing Direct Coupled Generator
- ± 1% Solid-State Voltage Regulation
-
Low 1,800 RPM Operating Speed
-
Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure
-
Single Series Circuit Control System with No Printed Circuit Boards – Tinned Wiring
-
Fresh Water Double Pass Heat Exchanger
-
Water Cooled Exhaust Manifold with Removable Integral Cupro-Nickel Heat Exchanger Core
-
Zinc Anode in Heat Exchanger
-
Stainless Steel Exhaust Elbow Cast
-
Gear Driven Raw Water Pump
-
Four Point Isolation Mounts S/S
-
Molded Blue Silicone Water Hoses with Stainless Steel AWAB Clamps
-
Air Intake Cleaner / Silencer
-
Spin-On Lube / Fuel Filters
-
Secondary 5 Micron Fuel Filter
-
Self Bleed Fuel System
-
USCG Approved Fuel Lines
-
Electric Fuel Transfer Pump
-
Forged Brass Oil Drain Valve with Safety Lock
-
Awl-Craft 2000 Urethane Finish
-
5 Year Limited Warranty
-
Circuit Breaker - Single Phase
-
Belt Guard
Specifications of Phasor 9.5 kW Marine Generator - K3-9.5kW
Kubota Model | D1105-E4BG |
Number of Cylinders | 3 |
Cubic Inch Displacement | 68.5 |
KW Rating at 60 Hz | 9.5 kw |
KW Rating at 50 Hz | 8.0 kw |
Fuel Consumption ( Gal/Hr ) | full load 0.76 Half Load 0.40 |
Electric End | Linz |
Bore x Stroke | 3.07" x 3.09" |
Dimensions (LxWxH) without enclosure | 31.5" x 18" x 22.5" |
Dimensions (LxWxH) with enclosure | 35" x 22" x 25.5" |
Weight (lbs.) | 567 |
Output (volts) | 120/240 |
Output (amps) | 80/40 |
Output (watts) | 9,500 (9.5 KW) at 60 HZ / 8,000 (8.0 KW) at 50 HZ |
Exhaust Dia. | 2.0" |
Raw Water Dia. | 3/4" |
Fuel Line Dia. | 5/16" |
Return Line Dia. | 3/16" |
Recommended Oil:
- 5w-40 Full Synthetic Oil
Optional Equipment
- Start - Stop - 20ft Harness
- Custom Remote Engine / Generator Instrument Panels
- DC Gauge Panel - 20ft Harness
- Stainless Steel Drip Pan
- Three Phase Generator Output
- Custom Front PTO Pulleys
- 24 Volt Starting System
- 50 Cycle Output
- Dedicated Motor Starting Generator Windings
- Sound Insulation Blanket
- Sound Attenuated Enclosure
- Powder Coated Aluminum
- Remote Oil Filter Kits
- BALMAR High Output Alternator
- Custom Chrome Packages
- Spare Parts Kit
Included With The Spare Parts Kit:
101-0084 |
1 x Duffle Bag with Phasor Marine Logo 2 x Kubota Oil Filters 2 x Kubota Fuel Filters 1 x Temp Switch 1/2 Plug 1 x Oil Pressure Switch w/Plug 1 x Kubota Thermostat gasket 1 x Kubota Thermostat Assy 1 x Phasor Heat Exchanger Oring 1 x 1/4 NPT 5/16 x 1 Zinc 1 x Impeller 302M for Oberdorfer Pump 1 x Oberdorfer Pump O-Ring 1 x Kubota V-Belt 2 x LP1 HE Neo Washer |