Gianneschi CM 22/1E/R Centrifugal Pump - 220V 60Hz 1Ph
A rugged 220V single-phase cast iron marine centrifugal pump featuring a 95mm open impeller and built-in thermal protection for reliable fluid transfer.

Click here for details
By buying this product you can collect up to 100 Citimarine points. Your cart will total 100 points that will be converted into a voucher of $10.00 towards your next purchase! Must be logged in to collect points.
Heavy-Duty Gianneschi CM 22/1E/R Centrifugal Pump
The Gianneschi CM 22/1E/R (MPN: 60CG22/1EMR1) is a heavy-duty, marine-grade cast iron centrifugal pump engineered in Italy. Designed for demanding applications such as freshwater circulation, gray water transfer, and fluid management on yachts and commercial vessels, this 220V 60Hz single-phase unit delivers highly reliable, continuous-duty performance. Treated with marine-grade anti-corrosive coatings and featuring a high-grade stainless steel motor shaft, the CM 22/1E/R is built to withstand harsh, humid bilge environments.

Open-Impeller Engineering
Unlike enclosed-impeller pumps that easily clog, the CM 22/1E/R utilizes a specialized open-impeller layout featuring a 95 mm brass/bronze impeller. This profile enables the pump to effortlessly handle moderately dirty emulsions, gray water, or mild suspended solids up to 4 mm in size without jamming. (Note: This pump is not self-priming and must be installed with flooded suction, mounted below the fluid level, to prevent dry-running and loss of prime).
Built-In Thermal Protection
For added safety and simplified wiring, the "CM" designation signifies a single-phase configuration equipped with an integrated thermal protector and a capacitor housed directly inside the terminal box. The unit utilizes a carbon/ceramic/NBR mechanical shaft seal for leak-free operation, and its heavy-duty thermal rating allows it to handle fluid temperatures up to 194°F under a maximum working pressure limit of 87 PSI (6 bar).
CM 22/1E/R Technical Specifications:
- Manufacturer: Gianneschi Pumps and Blowers
- Model: CM 22/1E/R
- Manufacturer Part Number (MPN): 60CG22/1EMR1
- Pump Type: Centrifugal (Not self-priming)
- Voltage: 220V
- Frequency: 60Hz
- Phase: 1Ph (Single-Phase)
- Material: Cast iron with marine-grade anti-corrosive coating
- Motor Shaft Material: Stainless steel
- Impeller: 95 mm open-impeller (Brass/Bronze)
- Seal Type: Carbon/Ceramic/NBR mechanical shaft seal
- Connections: 1" BSP threaded ports
- Maximum Solid Size: 4 mm
- Fluid Temperature Range: 14°F to 194°F (-10°C to +90°C)
- Maximum Working Pressure: 87 PSI (6 bar)
- Duty Cycle: Continuous Duty (S3 60%)
- Internal Protection: Built-in thermal protector and capacitor

FAQs
Is the Gianneschi CM 22/1E/R pump self-priming?
No, the Gianneschi CM 22/1E/R is not self-priming and must be installed with flooded suction (mounted below the water level) to prevent dry-running.
What voltage does the Gianneschi 60CG22/1EMR1 require?
This specific Gianneschi centrifugal pump is configured to operate on a 220V, 60Hz, single-phase (1Ph) electrical system.
What type of impeller does the Gianneschi CM 22/1E/R use?
It features a 95 mm brass/bronze open impeller designed to safely handle mildly dirty fluids and suspended solids up to 4 mm in size.
What are the inlet and outlet port sizes on this pump?
The pump utilizes standard 1-inch BSP threaded ports for both the suction and discharge connections.
Does the Gianneschi CM 22/1E/R have built-in thermal protection?
Yes, the "CM" series designation indicates it is equipped with an integrated thermal protector and a capacitor housed inside the terminal box.
