By buying this product you can collect up to 26 Citimarine points. Your cart will total 26 points that will be converted into a voucher of $2.60 towards your next purchase! Must be logged in to collect points.
KoolAir PM1000 - 1000 GPH - 115V - Mag-Drive Centrifugal Pump
(1) Customer review(s)
The Koolair PM1000-115V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine HVAC pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-115V is also ISO 8846 Marine Ignition Protected. 1000 gallons/hr.
Part Number: PM1000-115
Part Number: PM1000-115
Reference: PM1000-115
In Stock: 40
$269.99
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
KoolAir PM1000 Marine Pump - 115V - 1000 GPH
The Koolair PM1000-115V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine hvac pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-115V is also ISO 8846 Marine Ignition Protected. The PM1000 is magnetically driven pump with no shaft seal and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head.
The Koolair PM1000-115V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine hvac pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-115V is also ISO 8846 Marine Ignition Protected. The PM1000 is magnetically driven pump with no shaft seal and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head.
Key Benefits
- Run Dry Protection is how to withstand thermal overloads without failure. When cooled, the pump will resume operating normally.
- Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord will also come in contact with the solution.
- The inlet connection is a 1” female pipe thread and the outlet is ½” male pipe thread.
- Includes fully integrated, heavy duty, Epoxy coated marine base, as well as the original base.
- The motor is a 1 Phase 115V, 1/8 Horsepower motor, running on either 50 or 60 HZ.
- Maximum internal pressure is 50 PSI and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius.
- The hardened Carbon bushing allows for extended run dry time as a result without any damage to the pump head. See the parts diagram for assembly instructions. Trimming of the impeller is possible to modify flows or compensate for liquids of higher viscosity.
- Pumps 1000 gallons/hr
Performance Curve
Dimensions
Technical Specifications
Attribute | Information |
---|---|
Part Number | PM1000-115 |
Weight | 10 lbs |
Maximum Flow |
17.2 GPM (54.8 LPM) |
Maximum Head |
27 Feet of Head @ 11.7 PSI |
Maximum Internal Pressure |
50 PSI |
Maximum Liquid Temperature |
180° F (82° C) |
Inlet |
1″ FPT |
Outlet |
1/4″ MPT |
Hertz |
50/60 Hz |
Voltage |
115 Volt |
Phase |
Single Phase (1 PH) |
Watts |
216 |
Amps |
1.6 |
Horsepower |
1/8 HP |
RPM |
3450 |
Reviews
No customer reviews for the moment.
(1) Customer review(s)
100% of customers recommend this product
Rate it
Quality
Excellent Pump, Very reliable at a fraction of the competition.
2020-09-28 00:25:16
We have been replacing the march air cooled for this model and has worked fine for the last 5 years. 3 pumps on board.