FREE U.S. SHIPPING ON ONLINE ORDERS!*

KoolAir PM1000 - 230V - 1000 GPH

KoolAir PM1000 - 230V - 1000 GPH

KoolAir PM1000 - 230V - 1000 GPH

Customer ratings and reviews

The Koolair PM1000-230V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine HVAC pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-230V is also ISO 8846 Marine Ignition Protected. 1000 gallons/hr. 
Part Number:
PM1000-230       
KoolAir Marine Pumps

PM1000-230

By buying this product you can collect up to Your cart will total 21 points that will be converted into a of $2.10 towards your next purchase! Must be to collect points.

More info

KoolAir PM1000 Marine Pump - 230V - 1000 GPH
Webasto KoolAir PM1000
The Koolair PM1000-230V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine hvac pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-230V is also ISO 8846 Marine Ignition Protected. The PM1000 is magnetically driven pump with no shaft seal and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. 

Key Benefits

  • Run Dry Protection is how to withstand thermal overloads without failure. When cooled, the pump will resume operating normally.
  • Materials exposed to the solution (wet end) are Reinforced Polypropylene, Buna N and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord will also come in contact with the solution.
  • The inlet connection is a 1” female pipe thread and the outlet is ½” male pipe thread.
  • Includes fully integrated, heavy duty, Epoxy coated marine base, as well as the original base.
  • The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ.
  • Maximum internal pressure is 50 PSI and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius.
  • The hardened Carbon bushing allows for extended run dry time as a result without any damage to the pump head. See the parts diagram for assembly instructions. Trimming of the impeller is possible to modify flows or compensate for liquids of higher viscosity.
  • Pumps 1000 gallons/hr

Performance Curve

Webasto KoolAir Performance Curve

Dimensions

Webasto KoolAir PM1000

Technical Specifications

AttributeInformation
Part NumberPM1000-230
Weight10 lbs
Maximum Flow

17.2 GPM (54.8 LPM)

Maximum Head

27 Feet of Head @ 11.7 PSI

Maximum Internal Pressure

50 PSI

Maximum Liquid Temperature

180° F (82° C)

Inlet

1″ FPT

Outlet

1/4″ MPT

Hertz

50/60 Hz

Voltage

230 Volt

Phase

Single Phase (1 PH)

Watts

216

Amps

1.6

Horsepower

1/8 HP

RPM

3450



Webasto Marine Air Conditioning

Download

6 Other Models

e