Wire Rope Corrosion Control - Aerosol Can 340g, 12oz (Box of 12)
S2S Wire Rope Corrosion Control — 340 g (12 oz) aerosol, box of 12. S2S Wire Rope Corrosion Control polar bonds to metal like a magnet to steel and displaces water and oxygen.
By buying this product you can collect up to 19 Citimarine points. Your cart will total 19 points that will be converted into a voucher of $1.90 towards your next purchase! Must be logged in to collect points.
S2S Wire Rope Corrosion Control polar bonds to metal like a magnet to steel and displaces water and oxygen. Unlike grease, it penetrates all the way to the core of a wire rope, lubricating and protecting the strands you cannot reach — while leaving a non-tacky film that resists dirt and debris.
Key advantages
- Penetrates and lubricates to the core
- Polar bonds to all metals with long lasting adhesion
- Non-tacky film resists dirt and debris
- Reduces friction and wear
- Electrically non-conductive; stops electrolysis
- Withstands extreme temperatures
- Excellent for loosening seized studs and nuts
- Can be covered with S2S HD Corrosion Shield for extra protection
- Non-hazardous and non-toxic
Recommended uses
- Cranes, winches and hoists
- Mooring and towing wire ropes
- Drilling rigs and suspension bridges
- Guy wires, wire rope slings and post tension cables
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas.
This item
Box of 12 aerosol cans, 340 g (12 oz) each. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-WRCC-012-B012.