Comprar este producto puedes acumular hasta 19 puntos Citimarine. ¡Su carrito utilizará 19 puntos que se convertirán en un vale de descuento de 1,90 $ para su próxima compra! Debe iniciar sesión para acumular puntos.
Wire Rope Corrosion Control - Aerosol Can 340g, 12oz (Box of 12)
S2S Wire Rope Corrosion Control — 340 g (12 oz) aerosol, box of 12. S2S Wire Rope Corrosion Control polar bonds to metal like a magnet to steel and displaces water and oxygen.
S2S Wire Rope Corrosion Control polar bonds to metal like a magnet to steel and displaces water and oxygen. Unlike grease, it penetrates all the way to the core of a wire rope, lubricating and protecting the strands you cannot reach — while leaving a non-tacky film that resists dirt and debris.
Key advantages
- Penetrates and lubricates to the core
- Polar bonds to all metals with long lasting adhesion
- Non-tacky film resists dirt and debris
- Reduces friction and wear
- Electrically non-conductive; stops electrolysis
- Withstands extreme temperatures
- Excellent for loosening seized studs and nuts
- Can be covered with S2S HD Corrosion Shield for extra protection
- Non-hazardous and non-toxic
Recommended uses
- Cranes, winches and hoists
- Mooring and towing wire ropes
- Drilling rigs and suspension bridges
- Guy wires, wire rope slings and post tension cables
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas.
This item
Box of 12 aerosol cans, 340 g (12 oz) each. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-WRCC-012-B012.