Wire Rope Corrosion Control - 3.78L (1 US Gal)

S2S Wire Rope Corrosion Control polar bonds to metal like a magnet to steel and displaces water and oxygen. Unlike grease, it penetrates all the way to the core of a wire rope, lubricating and protecting the strands you cannot reach — while leaving a non-tacky film that resists dirt and debris.

Key advantages

• Penetrates and lubricates to the core
• Polar bonds to all metals with long lasting adhesion
• Non-tacky film resists dirt and debris
• Reduces friction and wear
• Electrically non-conductive; stops electrolysis
• Withstands extreme temperatures
• Excellent for loosening seized studs and nuts
• Can be covered with S2S HD Corrosion Shield for extra protection
• Non-hazardous and non-toxic

Recommended uses

• Cranes, winches and hoists
• Mooring and towing wire ropes
• Drilling rigs and suspension bridges
• Guy wires, wire rope slings and post tension cables

Application

Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas.

This item

Single 3.78 L (1 US gallon) can. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-WRCC-001.