No reward points for this product.

Bollard MG12 - 12.5 kW Marine Generator - 1800 rpm

MER Equipment marine generator MG12 - 12.5 kW - 1800 rpm. BOLLARD™ Generators are designed and built in the USA. The expected time between overhauls on the BOLLARD™ packaged generator set is 20 to 50 thousand hours. Bollard generators feature Imron™ 2 part marine epoxy overcoats on the engine, generator, and base frame. Accessory brackets are typically powder coated, and fasteners are primarily stainless steel to protect your investment from the harsh marine environment.

Part number: MG12
Reference: MG12

Bollard MG12 - 12.5 kW Marine Generator - 1800 rpm



MG12 - 12.5 kW Marine Generator        MER 12kw Marine Generator

Features

Unsurpassed Quality & Reliability
BOLLARD™ Generators are designed and built in the USA specifically for the rugged conditions of commercial use. The expected time between overhauls on the BOLLARD™ packaged generator set is 20 to 50 thousand hours.

High Efficiency Generators
Heavy Duty windings engineered for 80 deg. C rise of 40 deg. C ambient yield extended insulation service life, high electrical efficiency for maximum fuel economy, and superior motor starting at all voltages. Dedicated auxiliary excitation windings are standard, resulting in even higher motor starting together with 300% sustained short circuit capacity in a uniquely compact design.

Emissions
The BOLLARD™ MG12 12.5 kW Gen-Set is EPA certified Final Tier 4, CARB, EU, and MOC. It meets the lowest emissions levels available on the market today without exhaust after-treatment resulting in reduced maintenance and operating costs while preserving our clean air and water quality.

Keel Cooling, Heat Exchange, or Radiator Compatibility

Premium Marine Grade Protection
BOLLARD™ generators feature Imron™ 2 part marine epoxy overcoats on the engine, generator, and base frame. Accessory brackets are typically powder coated, and fasteners are primarily stainless steel to protect your investment from the harsh marine environment.

Heavy Duty Air Intake Filtration & Silencing
For increased performance, extended engine life, and quiet operation.

Heavy Duty Structural Steel Base Frame & Reduced Noise
For ease of installation, added structural integrity, safety, and durability. Superior vibration and noise dampening with a high mass flywheel, polyurethane vibration isolators, mass loaded & stiffened base frame, and de-noised engine.

Water Jacketed Exhaust Manifold and Expansion Tank
Provides low engine room temperatures and greatly reduces fire hazard

Controls, Gauges & Instrumentation
Standard enclosed prewired digital auto-start control panel with push button start/stop. Safety shutdowns are programmed for high water temp, low oil pressure, and over-speed. Included are LED readout of oil pressure, engine hours, DC system voltage, water temperature, engine speed in RPM, Generator Voltage and Frequency. Custom panels offer, auto-start/stop function for inverter or paralleling interface, load sharing, digital generator KW output LEDs and full function electrical distribution switchboards.

Fuel Performance

MG12 Fuel Performance

Technical Specifications

Model MG12
Engine Model 3CE1
Engine Type In-Line | 4 cycle | 3 Cylinder | Diesel
Displacement - L (cu.in) 1.60 (97.63)
Bore x Stroke - mm (in) 88 (3.46 x 90 (3.54)
Aspiration Naturally Aspirated
Oil Sump Capacity - qts (L) 6.34 (6.7)
Emission Regulation US EPA Tier 4 Certified
Prime - 60hz, 1800RPM (HP) 12.5kW (16.75)
Standby - 60hz, 1800RPM(HP) 13.75kW (18.42)
Motor Starting Range - HP 5.1 – 12.5 (Code G Motor @ 208VAC)
Voltage Regulation +/-1%
Starter 12v | 1.4kW
Alternator 12v | 40 Amp
MAX Operating Angle 20 (Constant) | 30 (Intermittent)
Package Weight – lbs (dry) 689 (engine, gen, manifold, skid only)
Length x Width x Height - inches (See brochure for details)

Dimensions

MER MG12 Dimensions


MER Equipment Marine Generators

Reviews

No customer reviews for the moment.
(0) Customer review(s)
Customer rating
Quality
Rate it