No reward points for this product.

Bollard MG210 - 210 kW Marine Generator - 1800 rpm

MER Equipment marine generator MG210 - 210 kW - 1800 rpm. BOLLARD™ Generators are designed and built in the USA. The expected time between overhauls on the BOLLARD™ packaged generator set is 20 to 50 thousand hours. This brushless generator delivers full power at exceptionally low winding temperatures. What that means to you is the highest kW per gallon of fuel burn on the market today.

Part number: MG210
Reference: MG210

Bollard MG210 - 210 kW Marine Generator - 1800 rpm

MG210 - 210 kW Marine Generator

Features

Unsurpassed Quality & Reliability
BOLLARD™ Generators are designed and built in the USA specifically for the rugged conditions of commercial use. The expected time between overhauls on the BOLLARD™ packaged generator set is 40 to 50 thousand hours.

High-Efficiency Generators
Heavy Duty windings engineered for 80°C rise of 40°C ambient yield extended insulation service life, high electrical efficiency for maximum fuel economy, and superior motor starting at all voltages. PMG dedicated excitation is standard, resulting in even higher motor starting together with 300% sustained short circuit capacity along with VFD and paralleling compatibility.

EmissionsThe Bollard MG50 –MG 395 Gen-Sets are EPA certified Tier 3 Marine, CARB, EU, and MOC. They meet the lowest emissions levels available on the market today without
exhaust after-treatment resulting in reduced maintenance and operating costs while preserving our clean air and water quality.

Keel Cooling, Heat Exchange, or Radiator Compatibility Premium Marine Grade Protection
Bollard generators feature Imron™ 2 part marine epoxy overcoats on the engine, generator, and base frame. Accessory brackets are typically powder coated, and fasteners are primarily stainless steel to protect your investment from the harsh marine environment.

Heavy Duty Structural Steel Base Frame & Reduced Noise
For ease of installation, added structural integrity, safety and durability. Superior vibration and noise dampening with a high mass flywheel, polyurethane vibration isolators, mass loaded & stiffened base frame, and de-noised engine.

Heavy Duty Air Intake Filtration & Silencing
For increased performance, extended engine life, and quiet operation.

Controls, Gauges, & Instrumentation
Standard enclosed prewired J1939 digital control panel with key start/stop and run/idle switch. Safety shutdowns are programmed for high water temp, low oil pressure, and over-speed. Included are LED readout of all J1939 trouble codes and diagnostics. Custom panels offer, auto-start/stop function for inverter or paralleling interface, load sharing, digital generator output LEDs and full function electrical distribution switchboards.

Optional SEADRIVE™ Front Power Take Off System
Compact heavy duty housing, pre-aligned, easy to install, service friendly, integrated torsional coupling, and available with or without a clutch.

Technical Specifications

Model  MG210
Engine Model 6090AFM85
Engine Type In-Line | 6 Cylinder | Diesel
Displacement - L (cu.in) 9.0 (549.21)
Bore x Stroke - mm (in) 118 (4.65) x 136 (5.35)
Aspiration Turbocharged - Air-to-Seawater Aftercooled
Oil Sump Capacity - qts (L) 32.75 (31)
Emission Regulation EPA Commercial Marine Tier 3
Prime - 60hz, 1800RPM (HP) 210kW (281)
Standby - 60hz, 1800RPM(HP) 231 kW (309)
Motor Starting Range - HP 89.8 - 97 (Code G Motor @ 208VAC)
Voltage Regulation +/-25%
Starter 12v | 4.5kW
Alternator 12v | 75Amp
Operating Angle - Degrees 12° (Constant) | 30° (Intermittent)
Dry Weight - lbs 4420 (engine, 432 gen, skid)
Length x Width x Height - in (See brochure for details)

Dimensions

Mer MG210 Marine Generator 210 kW

MER Equipment Marine Generators

Reviews

No customer reviews for the moment.
(0) Customer review(s)
Customer rating
Quality
Rate it