CHECK INSTALLATION SPACEUse your phone camera to view the product in your room
By buying this product you can collect up to 47 Citimarine points. Your cart will total 47 points that will be converted into a voucher of $4.70 towards your next purchase! Must be logged in to collect points.
CTM PM1000AH - 230V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine air conditioning pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-230V is also ISO 8846 Marine Ignition Protected. 1000 gallons/hr.
Available for local pickup at our Miami or Fort Lauderdale location
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
CTM - PM1000AH Marine Pump - 230V - 1000 GPH
The CTM PM1000AH is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (or around 11PSI).
The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Noryl, Buna N, Carbon, Ceramic, and Ceramic Magnet.. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.
Pumps are not self-priming, lack a suction lift, and thus require a flooded suction.
Electrical
Model is 230 Volt and have a 3 ft (0.9 m) Cord. Models have U.L. listed motors, which are rated for continuous duty.
.png.avif)
