By buying this product you can collect up to 126 Citimarine points. Your cart will total 126 points that will be converted into a voucher of $12.60 towards your next purchase! Must be logged in to collect points.
SHURFLO 9325-043-101 Submersible Pump 24VDC 1.85 GPM
SHURFLO 9325-043-101 Submersible Pump 24VDC 1.85 GPM - At 20 Feet of Lift, Maximum 230 Feet of Lift, Up To 100 PSI, 1/2" Hose Barb Fitting, for 4" Potable Water Wells, Applications Include Livestock Watering, Irrigation, Ponds, Islands, Remote Homes and Cabins.
Reference: SF 9325-043-101
$1,268.40
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
SHURFLO 9325-043-101 Submersible Pump 24VDC 1.85 GPM
The Shurflo 9325-043-101 submersible pump is the solution to your remote water pumping needs. This pump is rugged, durable and built to last. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. Great for livestock watering, irrigation, pond areation, remote homes and cabins - any place where potable water is needed.
Why should you get a controller with your pump? Well, they allow you to get more power out of your solar array, and allow you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-200 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.
Note: Do not use any SHURflo pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). Not for use where flammable vapors are present.
Positive displacement 3 chamber diaphragm pumpPermanent magnet motor (P/N 11-175-00)12-24 VDC nominal, 4.1 maximum amps, 230 feet maximum lift (70 meters), 100 feet maximum submersion (30 meters), 1/2" Hose Barb discharge port, 50 mesh stainless steel screen inlet, 3.0 degree cam, Net weight 6 Lbs. (2.7 Kg)
Features:
Long -life 12-24 VDC operation
For 4" wells or larger
Lifts water from wells up to 230' deep
Can pump up to 111 gallons per hour
Quick disconnect with "Watertite-Gland" Design Pat Pend
Corrosion-proof housing with stainless-steel fasteners
Runs dry without damage
50 mesh stainless steel inlet screen to keep debris out
Motor is sealed for long life and durability
State of the art solid diaphragm
The Shurflo 9325-043-101 submersible pump is the solution to your remote water pumping needs. This pump is rugged, durable and built to last. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. Great for livestock watering, irrigation, pond areation, remote homes and cabins - any place where potable water is needed.
Why should you get a controller with your pump? Well, they allow you to get more power out of your solar array, and allow you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-200 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.
Note: Do not use any SHURflo pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). Not for use where flammable vapors are present.
Positive displacement 3 chamber diaphragm pumpPermanent magnet motor (P/N 11-175-00)12-24 VDC nominal, 4.1 maximum amps, 230 feet maximum lift (70 meters), 100 feet maximum submersion (30 meters), 1/2" Hose Barb discharge port, 50 mesh stainless steel screen inlet, 3.0 degree cam, Net weight 6 Lbs. (2.7 Kg)
Features:
Long -life 12-24 VDC operation
For 4" wells or larger
Lifts water from wells up to 230' deep
Can pump up to 111 gallons per hour
Quick disconnect with "Watertite-Gland" Design Pat Pend
Corrosion-proof housing with stainless-steel fasteners
Runs dry without damage
50 mesh stainless steel inlet screen to keep debris out
Motor is sealed for long life and durability
State of the art solid diaphragm
Other Models
