SHURFLO 4558-163-E75 Dual Diaphragm Pump High Flow System II 10.0 24V
SHURFLO 4558-163-E75 Dual Diaphragm Pump High Flow System II 10.0 24V - Intermittent Duty Sealed Motors, Up To 10.0GPM Open Flow, 55PSI Demand Switch, 3/4” Hose Barb Ports, 13.6 Amps, Ignition Protected, CE Rated, Fresh Water Pump.
By buying this product you can collect up to 112 Citimarine points. Your cart will total 112 points that will be converted into a voucher of $11.20 towards your next purchase! Must be logged in to collect points.
SHURFLO 4558-163-E75 Dual Diaphragm Pump High Flow System II 10.0 24V
APPLICATION:
Multi-fixture Marine fresh water system installation. This system may be used for general fresh water transfer.
PUMP DESIGN:
Type: 4 Chamber Diaphragm pump
Pump Ports: ½”-14 NPSM-Male
Manifold: ¾” Barb
Liquid: 130°F [54°C] Max
Dry-Prime: 6 feet [1.82 M]
Run Dry: Yes
Inlet Pressure: 30 PSI Max. [2.06 Bar]
ELECTRICAL:
Motor: 24V DC Permanent Magnet, Intermittent Duty.
Protection: Thermal Overload, Automatic Restart
Leads: 14 AWG, 14-¾” [37 cm] Red +, 15” [38 cm] Black
Fuse: Primary pump 7.5 Amp Recommended,
Secondary pump 7.5 Amp Recommended,
Both pumps together: 15 Amps Recommended.
Control: Primary pump: Shut-Off 55 PSI [3.8 Bar]
± 2 PSI [0.13 Bar] Re-start 40 PSI [2.8 Bar]
± 2 PSI [0.13 Bar] Maximum By-Pass 65 PSI
[4.5 Bar] ± 2 PSI [0.13 Bar]
Secondary pump: Shut-Off 45 PSI
[3.1 Bar] ± 2 PSI [0.13 Bar] Re-start 30 PSI [2 Bar]
MATERIALS OF CONSTRUCTION:
Housings: Polypro
Valves/Seals: EPDM
Diaphragm: Santoprene
Hardware: Stainless Steel
AGENCY APPROVALS:
Ignition Protection 8846, CE, IMCI Certified
SHIPPING INFORMATION:
Approx. Net Weight: 20 Pounds [9.0 Kg] ea.
Carton Qty.: 1
Approx. Carton Size: 24”L X 18”W X 6”H [61cm x 46cm x 15cm]