Marine Pumps

The  Koolair PM1000-230V ODP (Open Drip Proof Motor Enclosure Model) is a sealless centrifugal magnetic drive marine HVAC pump. Series generates a maximum flow of 17.2 gallons per minute with a maximum head of 27 feet at 11.7 PSI. The PM1000-230V is also  ISO 8846 Marine Ignition Protected.  1000 gallons/hr.  Part Number: PM1000-230       

The Koolair SPM1000-115V  is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater.  The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in the open air for complete moisture protection.  Most commonly used on your boat for marine air conditioning while circulating seawater.  1000 GPH OUT OF STOCK UNTIL LATE MARCH - REPLACED BY MARCH LC-5M-MD Part Number: 5012087A       

The Koolair SPM1000-230V  is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater.  The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in open air for complete moisture protection.  Most commonly used on your boat for marine air conditioning while circulating seawater.  1000 GPH Part Number: 5012087A       

T he Koolair TPM1000 is a 115/230 Volt TEFC (Totally Enclosed Fan Cooled Motor Enclosure) model.  Is a sealless centrifugal magnetic drive seawater circulation coolant pump. It is most commonly used for marine air conditioning. Model generates a maximum flow of 17 gallons per minute as a result with a maximum head of 27 feet at 11.7 PSI   1000 gallons/hr. Replaces part number: 5011374B (Webasto) Part Number: TPM1000       

RARITAN 53100 Series Macerator Pump has a flow rate: 11 GPM (max.). Inlet: 1-1 / 2 "Male Barb & NPT Hose, Outlet: 3/4" / 1 "MNPT. Select voltage, current consumption: 12.3 A @ 12 volts DC / 6.2 A @ 24 volts DC.

RARITAN 53101 Series Macerator Pump with Waste Valve Assembly has a flow: 11 GPM (max.). It includes an innovative gate / waste valve assembly. Ports: Inlet: 1-1 / 2 "Barb and NPT Male Hose, Outlet: 3/4" MNPT. Select voltage, current consumption: 12.3 A @ 12 volts DC / 6.2 A @ 24 volts DC.

Raritan 24v Macerator Pump 1 1/2" Hose Barb is the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. MFG: 5310024. *Free US Shipping!

Jabsco PAR-Max 3 Shower Drain Pump 12V 3.5 GPM is a 3.5 GPM water system pump. Works for general purpose shower and pump drain. *Discontinued. Replacement suggestion: Jabsco Par-Max Shower Drain / General Purpose Pump - 3.5GPM-25psi-12VDC w/ Strainer

Jabsco PAR-Max 4 Bilge / Shower Drain Pump 12V is a general purpose bilge / nursery diaphragm pump. MFG: 31705-0092. *Discontinued. Suggested replacement: Jabsco Filterless Bilger - Sink - Shower Drain Pump

Jabsco Shower & Bilge Pump - 3.4GPM - 12V is a 3.4GPM 12V bilge and shower pump with a flow rate: Nominal 13 liters / min (3 US gallons / min). It is perfect because its operation is silent and totally resistant to corrosion. MFG: 37202-2012. DISCONTINUED - CLICK FOR REPLACEMENT

Jabsco 18590-2094 Self Priming Sealed Macerator Pump 24V is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. MFG: 18590-2094.

Jabsco Macerator Pump - 115V is the ideal answer to waste handling problems for marine, recreational vehicle and domestic uses. The macerator section grinds waste down to a particle size of 1/8" maximum so it can be pumped easily through a 1" hose discharge line. MFG: 18690-0000.