Macerator Pumps

Jabsco 18590-2094 Self Priming Sealed Macerator Pump 24V is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. MFG: 18590-2094.

New Jabsco motor and pump assembly. Part number 37041-0010. For use with 37010-series 12V marine and RV Jabsco electric toilets. Includes one new motor and pump assembly, and o-ring, four screws, and four lock washers.

SHURFLO 3200-101 Macerator Pump with 180° Port - Flow Rate: 13 GPM, Port Size: 1-1/2" Inlet / 1" Outlet. Nominal Voltage: 12 Volt DC, Current Draw: 17 Amps, Fuse: 25 Amp. Designed Specifically for Sanitation Waste and Fish Box Evacuations.

Jabsco SS Bolt Kit f/ Older 18590 Series Macerator Pumps - Replaces bronze studs and acorn nuts. MFG: 17288-1000.

SHURFLO 3200-001 Macerator Pump with 180° Port - Flow Rate: 13 GPM, Port Size: 1-1/2" Inlet / 1" Outlet. Nominal Voltage: 12 Volt DC, Current Draw: 17 Amps, Fuse: 25 Amp. Designed Specifically for Sanitation Waste and Fish Box Evacuations.

Oberdorfer - 209M-A94  Macerator Impeller Pump. Inlet: 2" Slip-On Hose, 1 1/2" Pipe Thread - Outler: 3/4" garden hose, 3/8" pipe thread - 1/10 HP - 2600 RPM - 32 V - 9 GPM @ 2 psi - Lip Seal Type - 2 lbs Weight. All bronze construction. Macerator wheel and impeller easily replaced. Rubber motor grommets for noise isolation. Stainless Steel motor shaft. Part Number:  209M-A94 Free US Shipping. MODEL DISCONTINUED

Oberdorfer - 209M  Macerator Impeller Pump. Inlet: 2" Slip-On Hose, 1 1/2" Pipe Thread - Outler: 3/4" garden hose, 3/8" pipe thread - 9 GPM @ 2 psi - Lip Seal Type - 2 lbs Weight. All bronze construction. Macerator wheel and impeller easily replaced. Rubber motor grommets for noise isolation. Stainless Steel motor shaft. Part Number:  209M Free US Shipping.

Oberdorfer - 406M-04N26  Flexible Impeller Utility Pump. 21 GPM - 1 HP - 115/230V - 1725 rpm - Mechanical Seal Type - ODP Frame - 40 lbs Weight. All bronze construction corrosion resistance. Ideal for marine service. Stainless Steel Shafts.Easy Impeller Replacement. Portable and compact. Vacuum Switch Shut-off Optional.  Part Number:  406M-04N26 Free US Shipping.

RARITAN 53100 Series Macerator Pump has a flow rate: 11 GPM (max.). Inlet: 1-1 / 2 "Male Barb & NPT Hose, Outlet: 3/4" / 1 "MNPT. Select voltage, current consumption: 12.3 A @ 12 volts DC / 6.2 A @ 24 volts DC.

RARITAN 53101 Series Macerator Pump with Waste Valve Assembly has a flow: 11 GPM (max.). It includes an innovative gate / waste valve assembly. Ports: Inlet: 1-1 / 2 "Barb and NPT Male Hose, Outlet: 3/4" MNPT. Select voltage, current consumption: 12.3 A @ 12 volts DC / 6.2 A @ 24 volts DC.

Raritan 24v Macerator Pump 1 1/2" Hose Barb is the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. MFG: 5310024. *Free US Shipping!

Jabsco Macerator Pump - 115V is the ideal answer to waste handling problems for marine, recreational vehicle and domestic uses. The macerator section grinds waste down to a particle size of 1/8" maximum so it can be pumped easily through a 1" hose discharge line. MFG: 18690-0000.