Comprar este producto puedes acumular hasta 2 puntos Citimarine. ¡Su carrito utilizará 2 puntos que se convertirán en un vale de descuento de 0,20 $ para su próxima compra! Debe iniciar sesión para acumular puntos.
Anchor Chain Corrosion Control - Aerosol Can 340g, 12oz
S2S Anchor Chain Corrosion Control — 340 g (12 oz) aerosol. S2S Anchor Chain Corrosion Control polar bonds to metal and creeps into hard-to-reach areas, protecting the entire anchoring system — chain, links, chain locker, windlass and hawse pipe.
Referencia: CO-ACCC-012
22,49 $
Envio gratuito para envíos superiores a 99$
International Shipping Calculator
Available for local pickup at our Miami or Fort Lauderdale location
Envio gratuito para envíos superiores a 99$
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Calculador de envio
S2S Anchor Chain Corrosion Control polar bonds to metal and creeps into hard-to-reach areas, protecting the entire anchoring system — chain, links, chain locker, windlass and hawse pipe. It needs no sandblasting and goes straight onto damp, rusted or painted steel, stopping rust on contact and keeping links from seizing.
Key advantages
- No sandblasting required
- Can be applied to damp surfaces
- Polar bonds to all metals, even over existing rust and paint
- Stops rust on contact
- Creeps into pitting corrosion, cracks and crevices
- Excellent lubricant and anti-seize; prevents corrosion between links
- Dielectric properties help shut down electrolysis
- Non-hazardous and non-toxic
Recommended uses
- Commercial vessels and cruise ships
- Offshore oil & gas platforms
- Navigational and mooring buoys
- Landing craft ramps
- Anchor chain, windlasses and chain lockers
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas, edges, cracks and welds.
This item
Single 340 g (12 oz) aerosol can. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-ACCC-012.