By buying this product you can collect up to 61 Citimarine points. Your cart will total 61 points that will be converted into a voucher of $6.10 towards your next purchase! Must be logged in to collect points.
Victron SmartSolar MPPT VE CAN 250V-100A w/VE.CAN Port
VICTRON SMARTSOLAR MPPT VE CAN 250V-100A WITH VE.CAN PORT uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
Victron SmartSolar MPPT VE CAN 250V-100A w/VE.CAN Port
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Victron SmartSolar MPPT VE CAN 250V-100A Features
- Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
- Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power (MPP) points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
- Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99 %.
- Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
- Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
- Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
- Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
- VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices.
- Synchronized parallel charging with VE.Can or Bluetooth Up to 25 units can be synchronized with VE.Can, and up to 10 units with Bluetooth.
- Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
- VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can.
- Remote on-off To connect for example to a VE.BUS BMS.
- Programmable relay Can be programmed to trip on an alarm, or other events.
- Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Specifications of SmartSolar MPPT VE CAN 250V-100A
Battery voltage | 12/24/48 V Auto Select (36 V: manual) |
Rated charge current | 100 A |
Nominal PV power, 12 V 1a,b) | 1450 W |
Nominal PV power, 24 V 1a,b) | 2900 W |
Nominal PV power, 36 V 1a,b) | 4350 W |
Nominal PV power, 48 V 1a,b) | 5800 W |
Max. PV short circuit current 2 | 70 A (max 30 A per MC4 conn.) |
Maximum PV open circuit voltage' | 250 V absolute maximum coldest conditions 245 V start-up and operating maximum |
Maximum efficiency | 99% |
Self-consumption | Less than 35 mA @ 12 V / 20 mA @ 48 V |