Victron Skylla-i Control GX Remote Panel f/Skylla Charger

The Skylla-i panel is a remote panel designed to work with all Skylla-i chargers. The Skylla-i charger uses the VE.CAN bus. Connecting the Skylla-i panel to your Skylla-i charger is a simple procedure. Connect the two devices with a regular UTP (Unshielded Twisted Pair) cable with two RJ45 connectors. Make sure that the two RJ45 bus terminators are in place at both ends. The Skylla-i panel comes complete with both RJ45 bus terminators. Both the Skylla-i charger and the panel have two RJ45 sockets which are internally connected, you can connect the cable to either socket.

Victron Energy Skylla-i Control GX

• The Skylla-i charger is switched on and off by briefly pressing the on|off button. Note that the main power switch on the charger is dominant, once it is switched off on the charger, the panel cannot switch the charger on anymore.

• The input current limit is modified by briefly pressing and releasing the rotary knob. The selection will automatically jump to input current limit if it was not yet active. Next the display shows the actual input current limit and blinks. Turn the rotary now to modify the input current limit. To confirm the new value either wait several seconds or briefly press and release the rotary knob

• For your comfort, the brightness of the LEDs is controlled automatically using a light sensor. When the ambient light level becomes lower the LEDs will be less bright which is more pleasant for the eye and reduces power consumption.

• Several Skylla-i control panels can be connected to one charger or to a set of synchronized and parallel connected chargers.