By buying this product you can collect up to 8 Citimarine points. Your cart will total 8 points that will be converted into a voucher of $0.80 towards your next purchase! Must be logged in to collect points.
Victron SmartSolar MPPT 100/20 - Up to 48 VDC
VICTRON SMARTSOLAR MPPT 100/20 UP TO 48VDC. A solar charger gathers energy from your solar panels, and stores it in your batteries.
Part number: SCC110020160R
Part number: SCC110020160R
Reference: SCC110020160R
In Stock: 14
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
Victron SmartSolar MPPT 100/20 - Up to 48 VDC
The Victron Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Victron Energy SmartSolar MPPT Features
- MPPT: Ultra Fast Maximum Power Point Tracking. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
- Remote Monitoring and Control. Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
- Load output The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Specifications of Victron SmartSolar MPPT
| Battery voltage (auto select) | 12/24/48V |
| Rated charge current | 20A |
| Nominal PV power, 12V 1a,b) | 290W |
| Nominal PV power, 24V 1a,b) | 580W |
| Nominal PV power, 48V 1a,b) | 1160W |
| Max. PV short circuit current 2) | 20A |
| Automatic load disconnect | Yes |
| Max. PV open circuit voltage | 100V |
| Peak efficiency | 98% |
| Self-consumption – load on | 26 / 20 / 19 mA |
| Self-consumption – load off | 10 / 8 / 7 mA |
| Charge voltage 'absorption' | 14,4V / 28,8V / 57,6V (adj.) |
| Charge voltage 'float' |
13,8V / 27,6V / 55,2V (adj.) |
| Charge algorithm |
multi-stage adaptive |
| Temperature compensation |
-16 mV / °C resp. -32 mV / °C |
Victron Energy - Manufacturer's Information
In the Box
- Centaur battery charger
- Installation hardware
- Owner's manual
Other Models
