By buying this product you can collect up to 18 Citimarine points. Your cart will total 18 points that will be converted into a voucher of $1.80 towards your next purchase! Must be logged in to collect points.
Victron Energy SCC110050210 SmartSolar MPPT Charge Controller - 100V - 50AMP
Part number: SCC110050210
Victron Energy SCC110050210 SmartSolar MPPT Charge Controller - 100 VDC - 50AMP
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Victron Energy SmartSolar MPPT Charge Controller Features:
- Bluetooth Smart built-in is the wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
- VE.Direct is included For a wired data connection to a Color Control GX, other GX products, PC or other devices
- Ultra-fast Maximum Power Point Tracking (MPPT) is included in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
- Advanced Maximum Power Point Detection in case of partial shading conditions. If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
- The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
- Outstanding conversion efficiency. No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
- Flexible charge algorithm. Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
- Extensive electronic protection. Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
- Internal temperature sensor. Compensates absorption and float charge voltage for temperature.
- Optional external battery voltage and temperature sensing via Bluetooth. A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Technical Specifications
SmartSolar Charger Controller | 100/50 |
Battery voltage (auto select) | 12/24V |
Rated charge current | 50A |
Nominal PV power, 12V 1a,b) | 700W |
Nominal PV power, 24V 1a,b) | 1400W |
Maximum PV open circuit voltage | 100V |
Max. PV short circuit current | 60A |
Maximum Efficiency | 98% |
Self-consumption | 12V: 30 mA 24V: 20 mA |
Charge voltage 'absorption | Default setting: 14,4V / 28,8V (adjustable) |
Charge voltage 'float' |
Default setting: 13,8V / 27,6V (adjustable |
Charge algorithm |
multi-stage adaptive |
Temperature compensation |
-16 mV / °C resp. -32 mV / °C |
Protection | Battery reverse polarity (fuse, not user accessible) PV reverse polarity. Output short circuit. Over temperature |
Operating Temperature | -30 to +60°C (full rated output up to 40°C) |
Humidity |
95%, non-condensing |
Data communication port |
VE.Direct |
Victron Energy - Manufacturer's Information
In the Box
- Smartsolar MPP battery charger controller
- Installation hardware
- Owner's manual