Victron Orion-TR DC-DC Converter - 48 VDC to 12 VDC - 30AMP Isolated

Isolated Model - separate in and out (-) leads

The Victron Orion-Tr DC-DC Converter Isolated is designed to convert direct current (DC) electrical power efficiently and reliably. The 48 VDC to 12 VDC model converts an input voltage of 48 volts direct current (VDC) into an output voltage of 12 volts direct current (VDC). This is used when there is a need to step down the voltage level. The term "isolated" means that the output voltage from the converter is electrically separated from the input voltage, important for safety reasons and to prevent electrical interference between the input and output sides of the converter.

Features of the Victron Orion-TR DC-DC Converter - 48 VDC to 12 VDC

• Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch.
• Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.
• All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel.
• High temperature protected The output current will reduce at high ambient temperature.
• IP43 protection When installed with the screw terminals oriented downwards.
• Screw terminals No special tools needed for installation.
• Input fuse (not replaceable) On 12V and 24V input models only