PLID Wrap - Anti-Corrosion Tape (Black) 50mm (2") x 10 Meters (Box of 36)

S2S PLID Wrap is an industrial tape infused with a high performance S2S rust inhibitor. Unlike petrolatum tapes that need surface prep and primer paste, PLID Wrap is a one-step application — wrap it straight over existing rust and paint. The infused inhibitor penetrates into pitting corrosion and leaves a pliable, waxy finish that conforms to irregular shapes and does not sag.

Key advantages

• Outlasts the leading competitor in ASTM B117-18 salt spray testing
• Simple one-step application — no primer paste required
• Can be applied to wet surfaces
• Polar bonds to all dissimilar metals
• Dielectric strength shuts down electrolysis
• Wide range of operating temperatures
• Can be cut and used to patch problem areas
• Non-hazardous, non-toxic and eco-friendly

Recommended uses

• Piping and pipelines
• Fittings, flanges and valves
• Pilings, pier structures and splash zones
• Structural steel and support bases
• Corrosion under insulation (CUI)

Application

No primer paste is required. Wrap the structure with PLID Wrap correct side down, keeping the tape in constant contact with the surface and using a 30% overlap. The pliable, waxy finish can be molded to irregular shapes, and the tape can be cut and inserted into openings to slow water ingress. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C).

This item

Box of 36 rolls, black, 50 mm x 10 m (2 in x 32 ft) each. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-PLIW-210-B036-BLK.