By buying this product you can collect up to 10 Citimarine points. Your cart will total 10 points that will be converted into a voucher of $1.00 towards your next purchase! Must be logged in to collect points.
PLID Paste - Anti-Corrosion Paste (Natural), QRT (964ml)
S2S PLID Paste Anti-Corrosion Paste — Quart (964 ml), natural. S2S PLID Paste is the brush-on member of the PLID family — a thick, non-sagging anti-corrosion paste for the fittings, flanges, threads and irregular shapes that are awkward to wrap or spray.
S2S PLID Paste is the brush-on member of the PLID family — a thick, non-sagging anti-corrosion paste for the fittings, flanges, threads and irregular shapes that are awkward to wrap or spray. It polar bonds to metal, penetrates into pitting corrosion and leaves a pliable, waxy barrier that stays put on vertical and overhead surfaces.
Key advantages
- Brush-on consistency for irregular shapes and tight spots
- Applies over existing rust and paint — no sandblasting
- Polar bonds to all dissimilar metals
- Penetrates into pitting corrosion, cracks and crevices
- Pliable, waxy finish does not sag
- Dielectric properties help shut down electrolysis
- Excellent anti-seize for threads and fasteners
- Non-hazardous, non-toxic and eco-friendly
Recommended uses
- Flanges, fittings and valve bodies
- Threaded fasteners, studs and nuts
- Splash zones and pier hardware
- Weld seams, edges and repair patches
Application
Remove debris, soap and degreaser from the surface; a wire brush can be used to take off loose corrosion. Brush or trowel on an even layer, working it into threads, crevices and pitting. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C).
This item
One quart (964 ml) tub of PLID Paste in natural. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-PLIP-QRT-NAT.