By buying this product you can collect up to Your cart will total 224 points that will be converted into a of $22.40 towards your next purchase! Must be to collect points.

Raymarine Evolution EV-150 Hydraulic Autopilot System Pack

Raymarine EV150 Power Pilot with T1 Pump is engineered specifically to meet the needs of small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. In.( 80cc) and 14.0 cu in (230cc) The EV-150 system is for 12-volt DC electrical systems only. MFG: T70330.

Reference: T70330
In Stock: 15
$2,249.99

Shipping Calculator
Free Shipping on Orders over $99
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator

RAYMARINE EV-150 Evolution Autopilot Pack with ACU-150 & Type 1 (1.0L) Hydraulic Pump for Powerboats with Ram Capacity* Between 80cc - 230cc

Raymarine Autopilot for Powerboats EV-150

No fuss, easy to install and robust - the Evolution autopilot combines Raymarine's autopilot expertise, FLIR Systems' R&D, and advanced aerospace guidance technology to create Evolution Ai control algorithms that deliver a new level of accurate autopilot control.


Features:

Automagic™ - No lengthy calibration procedures to perform. No compass calibration required. Plug and play connections

Easy to install - Freedom from the restrictions of conventional heading sensors. EV sensor core can be installed above or below deck. Install upside-down or off the vessel's center line.

Aerospace technology - 9-axis precision monitoring of pitch, roll, yaw and heading

Fuel efficient - Evolution autopilots steer so accurately they will save fuel and get you to your destination faster.

ACU-150 Control Unit
Raymarine ACU-150 E70430
The Evolution ACU150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. EV-150 system is engineered specifically to meet the needs of small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in. ( 80cc) and 14.0 cu in (230cc).

The Raymarine ACU-150 is a component of the Evolution™ Autopilot system and is designed to provide power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120.)


The ACU-150 connects to the SeaTalkng network for communication with its other peripherals. It also has connections for an optional Rudder Reference Unit (sold separately.) The ACU-150 works on 12-volt DC systems only.


The EV1 Sensor Core

Raymarine T70330
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.

Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems.

SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Raymarine Evolution Sensor Core EV-150 Hydraulic T70330

EV Sensor Core Benefits

Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change.
Flexible installation options. Mount above or below deck.
Simple SeaTalkng connectivity to the control head and ACU.
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions.
Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes.
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. 


Introducing HydroBalance Technology

Raymarine's Hydro-Balance Technology is an all new, patent-pending software update that delivers superior autopilot performance on boats with hydraulic steering, and particularly on boats with rudder reference-less steering and outboard motors.



Hydro-Balance is now available and any existing Evolution autopilot system customers can download the new software, free of charge, from the software download area of the Raymarine website.

Raymarine Type 1 Hydraulic Pump (12V) To Operate Powerboat Steering

The 1 ltr Hydraulic Pump is intended to operate the boat’s steering mechanism as part of a Raymarine autopilot system. It is primarily designed for use on boats with an existing hydraulic steering system. Alternatively, you can use this pump on a boat with mechanical steering in conjunction with a secondary steering ram.

The hydraulic pump contains a precision gear pump and a check valve driven by a servo motor.


raymarine ev-150

Raymarine Evolution pilots connect to hydraulic steering systems using a rugged hydraulic pump matched to the capacity of the hydraulic steering system.

If your system is hydraulic...

*You'll need to find out the size (in cc) of the hydraulic cylinder ram(s) mounted to the rudder or inboard engine boats, or to the drive unit on outboard engine boats. Your steering system documentation will have this information. This hydraulic pump is for a ram capacity between 80cc - 230 cc (4.9 cubic inch – 14 cubic inch). In some systems with dual steering rams in parallel, cylinder capacity is the total of both rams. Rams in series only require single capacity valve.


Raymarine P70Rs Autopilot Control Head - Autopilot Control Designed For Powerboats

The Raymarine p70Rs autopilot control head, with its combination of push-buttons and rotary control dial, is aimed at powered craft.

Raymarine P70Rs Control Head


The Raymarine P70Rs is an all weather, low power, optically bonded display that delivers brighter colors, sharper contrast, and a wide viewing angle. Easy to use LightHouse user interface with sculpted rubber keypad allows for precise operation in all conditions.

The p70Rs is powered by Raymarine's intuitive LightHouse user interface. which organizes all options into simple menu structures. With The Raymarine Evolution's Automagic 3-step setup process, you will be up and running in minutes.

Key Features of the P70Rs

3.5" diagonal super bright oversized LCD screen for maximum visibility
All weather, low power, optically bonded display technology delivers brighter colors, sharper contrast, and a wide 160° viewing angle

Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Displays the pilot information in different formats with automatic 3-step setup for leisure, cruising and performance
Simple system and group dimming / illumination
Easy to use LightHouse user interface with sculpted rubber keypad for precise operation in all conditions
SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA 2000 networks
Glass bridge industrial design compliments Raymarine eS and gS Series multi-function displays
Supplied with both black (eS Series style) and (e Series style) gunmetal bezels and protective suncover


Evolution Cabling Kit

Raymarine Evolution Autopilots come with the following SeaTalkng cable kit:

Raymarine Evolution Autopilot Cabling Kit


Specifications of EV-1 Sensor Core

Dimensions Diameter: 140 mm (5.5 in) | Depth (including mounting enclosure): 35 mm (1.4 in) | Depth (including wall bracket): 95 mm (3.8 in)
Nominal supply voltage: 12 V (powered by SeaTalkng system)
Operating voltage range: 10.8 V to 15.6 V dc
Power consumption
(taken from SeaTalkngsystem): 30 mA
SeaTalkng LEN
(Load Equivalency Number): 1
Sensors: 3-axis digital accelerometer | 3-axis digital compass | 3-axis gyro digital angular rate sensor
Data connections: SeaTalkng | NMEA 2000 DeviceNet (EV-2 only)
Installation environment: Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF), Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF), Relative humidity: max 93%
Waterproof rating: IPX 6
Weight: 0.29 kg (0.64 lbs)
EMC compliance Europe: 2004/108/EC | Australia and New Zealand

EV-Dimensions

Specifications of ACU-150 Control Unit:

Nominal power supply: 12 V
Operating voltage range: 10.8 V to 15.6 V dc
Drive current output: Maximum continuous 12 A at supply voltage
Drive clutch output: No clutch connection
Connections: Rudder reference sensor, Power, Drive motor, Ground
Power consumption (standby) main power supply: 300 mA (12 V)
Power consumption (standby) SeaTalkng power supply: No power supply to SeaTalkng
SeaTalkng LEN (Load Equivalency Number): 1
SeaTalkng power out: No power supply to SeaTalkng
Data connections: SeaTalkng
Installation environment: Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF) | Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF) | Relative humidity: max 93%
Waterproof rating: Connector panel - IPX2, Drive electronics - IPX6
Weight: 0.6 kg (1.32 lbs)
Conformance Europe: 2004/108/EC | Australia and New Zealand: C-Tick, Compliance Level 2

Raymarine ACU Dimensions


Specifications of P70Rs Autopilot Control Head

Display Type: 16-bit Color TFT LCD 
Screen Size: 3.45"diag. 
Width: 4 3/8" 
Height: 4 5/8" 
Depth: 1 3/8" 
Cutout Size: 3 5/8"dia. x 2 3/16"D w/cable 
Horizontal Pixels: 320 
Vertical Pixels: 240 
Number of Colors: 64,000 
Data Interface: SeaTalkng, NMEA 2000, 
SeaTalk Voltage: 12V DC 
Amperage: 69mA no lighting, 134mA 100% illumination
Waterproof Rating: IPX6 and IPX7 
Warranty: Three years (with product registration), Two years without registration.

Raymarine Logo

Warranty On Raymarine EV-150 Evolution Autopilot System, 1.0L Hydraulic Pump (Powerboat), P70Rs Control Head included

*2 Year Standard Raymarine Warranty. Extend into 3 Year Warranty by Registering Product With Raymarine. Your Proof of Purchase documentation is important. Please keep it in a safe place. If you need a warranty service your proof of purchase will be required.

Reviews

No customer reviews for the moment.
(0) Customer review(s)
Customer rating
Quality
Rate it