By buying this product you can collect up to 75 Citimarine points. Your cart will total 75 points that will be converted into a voucher of $7.50 towards your next purchase! Must be logged in to collect points.

REVERSO Automatic Outboard Flushing System - 1 Engine

REVERSO Automatic Outboard Flushing System - 1 Engine - flush all outboard engines automatically in a sequence. After a single hose connection and one press of a button, the system will flush one engine at a time and shuts down after all flushing cycles are complete.12V DC. Not compatible with I/O Engines.

DISCONTINUED - CLICK FOR REPLACEMENT

Part Number: 35-3861-01

Reference: 35-3861-01

Free US Shipping on This Item!

International Shipping Calculator

Return Policy

REVERSO AUTOMATIC OUTBOARD FLUSHING SYSTEM - Reverso Engine Flush

The solution to flushing saltwater from outboard engines and preventing corrosion.

KEY FEATURES OF THE REVERSO ENGINE FLUSH

Prevent engine corrosion and clear out invasive species
Less cleaning time to put the boat away
Boat can be in or out of the water
Automatically switches to next motor until all have been flushed

Service Up To 4 Outboards Without The Hose Hassle

The system works whether the vessel is in or out of the water, with the engine off, and in the vertical or tilted position. The water travels from the hose, through the system, and sent to each engine for a preset time– until the last motor is ushed. The system automates the ushing sequence so the user does not have to connect the hose to every ushing port.

Built-In Solution To Engine Flushing

It can be installed at the OEM level or as a retro t. Mounted on the bulkhead or transom locker, the system is permanently plumbed to each engine through the engine’s wiring loom. The system features the hose connection and start button on the unit itself. Similar
to Version 1.5, the Version 2 will also offer a separate hose connection and a waterproof start button that can be installed remotely near the transom and/or console. Minimizing the reach is a big added convenience.

SPECIFICATIONS

Voltage: DC 12V
Max Amp Draw: 3A
Base: Marine grade starboard - white
Cover: High-impact plastic
Water Inlet: 3/4" hose barb straight and 90° elbow included.
Water Outlet to Engine: 3/8" hose barb straight and 90° elbow fitting. 1/2" hose barb straight and 90° elbow fitting for engines over 300 HP.

HOW TO CHOOSE YOUR REVERSO AUTOMATIC OUTBOARD FLUSHING SYSTEM

Step 1 - Choose your System: a basic system to flush all outboard motors. 3' inlet hose kit is included.

Reverso Engine Flush

Part #	Engine Setup
35-3861-01	1 Engine

Step 2 - Choose Fitting Kit:
Required: Inlet 3/4” straight and 90° elbow fitting, Outlet 3/8” and 1/2” hose barb in straight and 90° elbow fittings.

Part #	Engine Setup
35-3955-01	1 Engine

Step 3 - Choose your remote switch (Optional):
to mount a remote switch in an area easier to access than the system itself.

Part #	Harness Size
35-3954-01	3 feet
35-3954-02	6 feet
35-3954-03	9 feet
35-3954-04	12 feet
35-3954-05	15 feet
35-3954-06	18 feet

Step 4 - Choose inlet hose (Optional): to mount a remote hose connection elsewhere or provide a comfortable reach to connect hose.

Part #	Hose Kit Size
35-3951-02	2 feet
35-3951-03	3 feet
35-3951-04	6 feet
35-3951-05	9 feet

Step 5 - Choose deck kit (Optional): can be used with inlet hose kit. Includes angled connector.

Part #	Deck Kit
35-3952-01	With 3/4" hose barb straight fitting
35-3952-02	With 3/4" hose brb 90-degree elbow fitting

Step 6 - Choose Faceplate (Optional): to mount a Deck Kit only, or Deck Kit and Remote Switch.

Part #	Faceplate
35-3952-07	Deck Kit Only
35-3952-03	For Deck Kit and Remote Switch
35-3952-04	For Deck Kit and Remote Swicth 90°
35-3952-05	For Deck Kit and Remote Switch 180°
35-3952-06	For Deck Kit and Remote Switch 270°