Comprar este producto puedes acumular hasta 3 puntos Citimarine. ¡Su carrito utilizará 3 puntos que se convertirán en un vale de descuento de 0,30 $ para su próxima compra! Debe iniciar sesión para acumular puntos.
Corrosion Shield - Aerosol Can 340g, 12oz
S2S Corrosion Shield — 340 g (12 oz) aerosol. S2S Corrosion Shield polar bonds to metal like a magnet to steel, displacing water and oxygen and leaving an even, lubricating film that creeps into hard-to-reach areas.
Referencia: CO-CORS-012
23,39 $
Envio gratuito para envíos superiores a 99$
International Shipping Calculator
Available for local pickup at our Miami or Fort Lauderdale location
Envio gratuito para envíos superiores a 99$
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Calculador de envio
S2S Corrosion Shield polar bonds to metal like a magnet to steel, displacing water and oxygen and leaving an even, lubricating film that creeps into hard-to-reach areas. It delivers long-lasting protection and excellent anti-seize performance on everything from wellheads and flanges to motors, batteries and machined surfaces.
Key advantages
- 500+ hours without corrosion in ASTM B117-18 salt spray testing
- Prevents rust and corrosion for up to 3 years
- Rubber compatible to ASTM D471 standards
- Dielectric strength of 36,000 volts
- Can be applied over existing rust and paint, and to damp surfaces
- Self-healing; stops rust on contact
- Removes easily with high pH detergent
- Ultra low VOCs and zinc-free
- Non-hazardous and easy to use
Recommended uses
- Wellheads, pipelines and piping
- Fittings, flanges and valves
- Electrical, electronics and batteries
- Offshore rigs and cranes
- Motors, machined surfaces and sculptures
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. Paint topcoats over Corrosion Shield are not recommended. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C).
This item
Single 340 g (12 oz) aerosol can. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-CORS-012.