Comprar este producto puedes acumular hasta 58 puntos Citimarine. ¡Su carrito utilizará 58 puntos que se convertirán en un vale de descuento de 5,80 $ para su próxima compra! Debe iniciar sesión para acumular puntos.
HD Corrosion Shield - 20L (5 US Gal)
S2S HD Corrosion Shield — 20 L (5 US gal) pail. S2S HD Corrosion Shield is the heavy-duty member of the Corrosion Shield family, formulated for assets that take a beating.
S2S HD Corrosion Shield is the heavy-duty member of the Corrosion Shield family, formulated for assets that take a beating. It clears 1,000+ hours in ASTM B117-18 salt spray testing and goes straight onto damp, rusted or painted steel — ideal for tank deck piping, ballast tank plating, wellheads and offshore equipment.
Key advantages
- 1000+ hours without corrosion in ASTM B117-18 salt spray testing
- Ultra low VOCs and zinc-free
- Dielectric strength of 3,200 volts
- Works on dissimilar metals
- Rubber compatible to ASTM D471 standards
- Safe on batteries, electrical and electronics
- Can be applied over existing rust and paint, and to damp surfaces
- Removes easily with high pH detergent
- Non-hazardous, non-toxic and eco-friendly
Recommended uses
- Tank deck piping and valves
- Bottom of ballast tank plating
- Wellheads, fittings and flanges
- Offshore rigs and cranes
- Equipment, parts, motors and machined surfaces
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. Paint topcoats over HD Corrosion Shield are not recommended. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C).
This item
Single 20 L (5 US gallon) pail. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-HDCS-005.