HD Corrosion Shield - 205L (55 US Gal)

S2S HD Corrosion Shield is the heavy-duty member of the Corrosion Shield family, formulated for assets that take a beating. It clears 1,000+ hours in ASTM B117-18 salt spray testing and goes straight onto damp, rusted or painted steel — ideal for tank deck piping, ballast tank plating, wellheads and offshore equipment.

Key advantages

• 1000+ hours without corrosion in ASTM B117-18 salt spray testing
• Ultra low VOCs and zinc-free
• Dielectric strength of 3,200 volts
• Works on dissimilar metals
• Rubber compatible to ASTM D471 standards
• Safe on batteries, electrical and electronics
• Can be applied over existing rust and paint, and to damp surfaces
• Removes easily with high pH detergent
• Non-hazardous, non-toxic and eco-friendly

Recommended uses

• Tank deck piping and valves
• Bottom of ballast tank plating
• Wellheads, fittings and flanges
• Offshore rigs and cranes
• Equipment, parts, motors and machined surfaces

Application

Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. Paint topcoats over HD Corrosion Shield are not recommended. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C).

This item

Single 205 L (55 US gallon) drum. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-HDCS-055.