By buying this product you can collect up to 46 Citimarine points. Your cart will total 46 points that will be converted into a voucher of $4.60 towards your next purchase! Must be logged in to collect points.
Anchor Chain Corrosion Control - 20L (5 US Gal)
S2S Anchor Chain Corrosion Control — 20 L (5 US gal) pail. S2S Anchor Chain Corrosion Control polar bonds to metal and creeps into hard-to-reach areas, protecting the entire anchoring system — chain, links, chain locker, windlass and hawse pipe.
S2S Anchor Chain Corrosion Control polar bonds to metal and creeps into hard-to-reach areas, protecting the entire anchoring system — chain, links, chain locker, windlass and hawse pipe. It needs no sandblasting and goes straight onto damp, rusted or painted steel, stopping rust on contact and keeping links from seizing.
Key advantages
- No sandblasting required
- Can be applied to damp surfaces
- Polar bonds to all metals, even over existing rust and paint
- Stops rust on contact
- Creeps into pitting corrosion, cracks and crevices
- Excellent lubricant and anti-seize; prevents corrosion between links
- Dielectric properties help shut down electrolysis
- Non-hazardous and non-toxic
Recommended uses
- Commercial vessels and cruise ships
- Offshore oil & gas platforms
- Navigational and mooring buoys
- Landing craft ramps
- Anchor chain, windlasses and chain lockers
Application
Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas, edges, cracks and welds.
This item
Single 20 L (5 US gallon) pail. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-ACCC-005.