By buying this product you can collect up to 24 Citimarine points. Your cart will total 24 points that will be converted into a voucher of $2.40 towards your next purchase! Must be logged in to collect points.
Mermaid Condensator Kit - Condensation Removal Device
The Mermaid Condensator Kit is the easiest way to keep your bilge or sump pumps dry and protected. The units function on the Venturi principle, which uses a vacuum effect that pulls the condensation water out of the drain pan, combines it with any discharge water, and sends it overboard where it belongs.
MERMAID Condensator - Condensation Removal Device
Mermaid Manufacturing's condensation removal device is the easiest way to keep your bilge or sump pumps dry and protected. The units function on the Venturi principle, which uses a vacuum effect that pulls the condensation water out of the drain pan, combines it with any discharge water, and sends it overboard where it belongs.
This compact unit is 6 inches long including the inlet / outlet water hose barbs. As long as you keep this marine condensator clean, it will work hard for you. For your convenience, all units are shipped with everything you need for installation.
**This product needs a MINIMUM of 300 GPH of water to vacuum properly**.
Specifications
MERMAID CONDENSATOR KIT CONTENTS
- Mermaid Condensator
- 5/8″ hose
- 1/2″ hose
- mini check valve
- filter
- screws
- Clamps
Just like every other Mermaid Manufacturing product, our marine condenser units are made in our factory by our skilled technicians. If you have any difficulty with installation, just call us. Someone is always here to help you.