FMD1835 Remote Display

Add a Full-Function Second Station to Your Furuno Radar

The FMD1835 is a high contrast 10.4" color LCD second-station Radar Display. Designed for use on a wide range of vessels, the FMD1835 offers an ideal solution for a secondary Radar monitoring station, or for retrofitting an existing radar installation on pleasure craft, fishing boats and work boats. This new radar display offers crystal clear target presentation with automatic Gain/Sea/Rain controls to deliver noise-free radar presentation. 

The FMD1835 can be interconnected with other navigation equipment such as chart plotters and sounders through Furuno's programmable NMEA 0183 interface system, affording operators the ability to expand their boat's system as needed.

AIS/ARPA Display:

Up to 100 AIS and 10 ARPA targets can be tracked and overlaid on the radar screen to assist the operator in monitoring other vessel movements. Since AIS works by VHF transceiver system, a variety of navigational information such as vessel name, speed, ROT, draft, and the destination of the selected targets can be included in real time. Unlike ARPA targets, AIS targets are visible on-screen even if they are obscured by large ships or islands.

Note: The FMD1835 display, configured as a Slave or Secondary display in a radar system, does NOT allow Pulse Length and Pulse Repetition Rate Control (Range Control) of the Master Radar Display. Independent control of Gain, Sea Clutter, and Rain Settings are provided but, the secondary display should be set to a similar range as the master radar display to maintain matched image quality.

In the box:

• FMD1835 Display 

• Mounting bracket and power cord

• 10M signal cable

• Owner's manual