Marine Air Conditioner Parts & Accessories

The FX-Maxx Control Display is Micro-Air's long-standing cabin control standard for both self-contained and split DX (Direct Expansion) systems and for CW (Chilled Water) air handlers. Part Number:  ASY-385 Order Processing time will be 7-10 Days

The FX-Maxx Control Display Designer Series is a unique legacy offering only from Micro-Air. The Designer Series is functionally compatible with the standard FX-Maxx Control Display. It was originally introduced by request for high-end megayacht applications where decor and look were important.  Part Number:  ASY-385-X09

NEW Bezel Vimar EIKON for Dometic Smart Touch & Micro-Air Easy Touch Displays / Controls cover. Available in multiple colors. Dimensions: 4.72 x 3.35 in (120 x 85 mm) 

NEW  Vimar Idea Round Bezel for Dometic Elite and SMXht Displays / Controls cover. Available in multiple colors. Dimensions: 4.84 x 3.23 in x .35 in (123 x 82 x 9 mm) 

NEW Temperature Sensor TSEP, RJ11, From 5 to 80 feet . 90-day warranty*. Probe temperature Sensor for Marine Air Conditioning systems. Compatible with Dometic, Marine Air, Cruise Air, Webasto, and any other Self-Contain or Split Gas unit that uses RJ11 connector (Phone Jack connector). Perfect Dometic Temperature Sensor replacement.   Does not work with chiller units. 6-Pin Cable. Reference: TSEP

NEW Temperature Sensor for Chiller Units, RJ12, From 5 to 40 feet. 90-day warranty*. Probe temperature Sensor for Marine Air Conditioning systems with brass housing and glass-encapsulated thermistor. Compatible with Dometic, Marine Air, Cruise Air, Webasto, and any other chiller unit that uses RJ12 connector (Phone Jack connector). Does not work with self-contained or split systems.  6-Pin Cable. Part Number: WTS

8-Pin display cable. This display cable is 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end. This cable is compatible with all Micro-Air cabin and chiller controls. Select 6 ft to 75 ft.  Compatible with Dometic 8-Pin Controls. Part Number: SUB-031

This display cable is 6-conductor, shielded cable with reversed RJ-12 modular plugs on each end. It is compatible with Boards A-281, A-288, U-Boards, MAQ, equivalent OEM control boards, EasyTouch 6-pin, and equivalent OEM control display. This cable replaces the Dometic CXP Cable. Part Number: SUB - CXP

NEW 4 Pin Adapter - Socket to RJ12 (CX) Male Plug (SMXIIAB, A-288C, A-282NC). 90-day warranty*. MFG#: 4163805  / 290340229 (New Part Number)

The CX Cable works to connect the SMX II AB control to the new generation units, new U-Board or A288-D board. 90-day warranty*. Cable has a RJ12 Jack

The FX-2 Complete Feature Kit saves time, money and takes the guess work out of trying to figure out what components are needed for an upgrade or new build for your marine cabin control.  Both the WIFI and non WIFI kits come with all compatible parts for easy installation and setup.  Part Number: KIT-360-X02 (with WIFI) / KIT-360-X01 (without WIFI)  Order Processing time will be 5-7 Days

The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications.  It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364 Important:  X36 model will only work with units up to 18,000 BTUs when connected to 230V