Automotive Rust Proofing (1 gallon can)

S2S Automotive Rust Proofing is a polar-bonding rust inhibitor built for cars, trucks, trailers and heavy equipment. It bonds to metal like a magnet to steel and shrugs off road salt, sand and extreme weather, leaving a non-tacky, self-healing film that creeps into scratches instead of collecting dirt.

Key advantages

• Easy to apply, with no curing time
• Works on dissimilar metals
• Resists splash and spray
• Penetrates under existing rust and de-scales
• Non-tacky coating does not attract dirt and debris
• Electrically non-conductive; stops electrolysis
• Rubber compatible to ASTM D471 standards
• Wide range of operating temperatures
• Self-healing film creeps into scratches
• Non-hazardous, non-toxic and eco-friendly

Recommended uses

• Fleet vehicles, trucks and trailers
• Heavy equipment and agricultural machinery
• Automobiles and rail cars
• Battery terminals and electrical connectors
• Engine bays, frames and undercarriages

Application

Apply to rusted, painted, damp or bare metal — no sandblasting needed. Remove debris, soap and degreaser first; a wire brush can be used to take off loose corrosion. For best results apply when surface temperatures are between 41°F and 99°F (5°C – 37°C), laying a thicker coat over known problem areas, edges, cracks and welds.

This item

Single 3.78 L (1 US gallon) can. Supplied by Citimarine Store, part of the S2S Corrosion Solutions range from Valkyrie. Reference CO-AUTR-001-USA.