LIP SEAL F 2000 - For 2" SureSeal

Tides Marine SureSeal Spare Seal Carrier Kit  / KF-2000-01. Convenient device for storing spare lip seals on the propeller shaft between the SureSeal and the propeller shaft coupling. The SureSeal design allows you to replace worn lip seals in the housing with these spare lip seals without uncoupling the shaft from the transmission, even while in the water. This kit comes with (2) 2" Lip Seal and (2) Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from dust, oil or falling debris. For a SureSeal, StrongSeal or Rudder with a 2 Inch Shaft.

TIDES MARINE FSK-2000-2750-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 2 3/4 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-2750-1 x 1 HOSE 2750- x 1 (6 inches) CLAMP-3000 x 4 HAT-2000 x 1

TIDES MARINE FSK-2000-3000-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 3 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-3000-1 x 1 HS 3000-3000 x 1  CLAMP-3000 x 4 HAT-2000 x 1

TIDES MARINE FSK-2000-3125-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 3 1/8 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-3125-1 x 1 HOSE 3000 x 1 (8 inches) CLAMP-3000 x 4 HAT-2000 x 1

TIDES MARINE FSK-2000-3250-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 3 1/4 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-3250-1 x 1 HOSE 3250-3250 x 1  CLAMP-3500 x 4 HAT-2000 x 1

TIDES MARINE FSK-2000-3500-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 3 1/2 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-3000-1 x 1 HS 3000-3500 x 1  CLAMP-3000 x 2 CLAMP-3500 x 2 HAT-2000 x 1

TIDES MARINE FSK-2000-4000-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 4 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-3500-1 x 1 HS 3500-4000 x 1  CLAMP-3500 x 2 CLAMP-4000 x 2 HAT-2000 x 1

TIDES MARINE FSK-2000-4250-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 4 1/4 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-4000-1 x 1 HS 4000-4250 x 1  CLAMP-4000 x 2 CLAMP-4250 x 2 HAT-2000 x 1

TIDES MARINE FSK-2000-4500-1 SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 4 1/2 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches . Parts Included in this Kit : FSA-2000-4000-1 x 1 HS 4000-4500 x 1  CLAMP-4000 x 2 CLAMP-4250 x 2 HAT-2000 x 1

TIDES MARINE FSK-2000-5000-1  SureSeal drip-free, self-aligning propeller shaft seal with TWO water injection fittings for a 2 Inch Propeller Shaft and a 5 Inch Stern Tube. The Minimum Distance required from the end of the stern tube to the coupler is 7 1/4 Inches. Parts Included in this Kit: FSA-2000-4000-1 x 1 HS 4000-5000 x 1  CLAMP-4000 x 2 CLAMP-5000 x 2 HAT-2000 x 1