By buying this product you can collect up to 23 Citimarine points. Your cart will total 23 points that will be converted into a voucher of $2.30 towards your next purchase! Must be logged in to collect points.
316L SS GEAR HOSE CLAMP - 1.38" to 1.78" - SAE 24
Entirely 316L stainless steel with a non-perforated, rolled edge, embossed band with a one-piece double locked screw cage.
PART NUMBER: 07-HC4-5
PART NUMBER: 07-HC4-5
Reference: 07-HC4-5B
$57.30
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
GEAR HOSE CLAMP - SAE 24 - 316L SS
The PYI Hose Clamps are made entirely out of 316L stainless steel. 316/316L are the standard marine grades of stainless steel (SS) because of its superior resistance against corrosive chemicals found in salt water, de-icing salts, and corrosive industrial chemicals and acids. 316L SS utilizes a higher percentage of molybdenum, chromium and nickel than 304 SS. The addition of these elements, notably molybdenum, improves the resistance to corrosion and chloride pitting, provides a greater creep resistance, and a stronger stress-to-rupture and tensile strength at elevated temperatures.
DURABLE & STABLE CLAMPING FORCE
The PYI Hose Clamp utilizes a durable riveting screw cage design that is machined from a single piece of 316L stainless steel which is capable of withstanding high tightening torque and internal hose pressure. Our Hose Clamps can be hand tightened up to 15.5 NM without the screw slipping or distorting the screw cage during its installation and use providing a reliably strong and stable clamping force and a long-lasting hold that is ideal for most demanding applications.
Technical Specification
| PART NUMBER | A | B | C | D | E | RECOMMENDED TORQUE |
| 07-HC4-5 | 1.38"-1.78" (35-45mm) |
0.94" (24mm) |
0.47" (12mm) |
0.50" (12.5mm) |
0.58" (14.65mm) |
45 in/lbs |
| PRODUCT CROSS REFERENCE GUIDE | ||||||
| PYI HOSE CLAMP PART # | RANGE OF ADJUSTMENT | ABA | AWAB | MURRAY | SAE | TRIDON |
| 07-HC4-5 | 1.38"-1.78" (35-45mm) |
08134003038 | 316044 | EBL12x050SS | 24 | 534150045 |
Features
- Safe For All Types of Hoses:
By rolling the edges and removing perforations and ribs on the inside portion of the embossed hose band, the PYI Hose Clamp can be used on the softest hoses without worry of damage to the underlying hose surface during installation and throughout its use
- Durable & Stable Clamping Force:
The PYI Hose Clamp utilizes a durable double locked screw cage design that is machined from a single piece of 316L stainless steel which is capable of withstanding high tightening torque and internal hose pressure. Our Hose Clamps can be hand tightened up to 15.5 NM (135 in/lbs.) without the screw slipping or distorting the screw.
- Reliable:
PYI Hose Clamps are manufactured entirely out of 316L Stainless Steel giving them excellent resistance to corrosive chemicals and acids that could limit the life of other metals. Whether used industrially or around the house, the PYI Hose Clamp will keep your hose secure in some of the harshest environments.
- Quality at Every Level of Manufacturing:
Tested and certified under ISO 9001:2015, these standards assure excellent design and manufacturing quality across the entire manufacturing process, from inception to implementation.
- 316L Stainless Steel:
16L stainless steel utilizes a higher percentage of molybdenum, chromium and nickel than 304 stainless steel. The addition of these elements, notably molybdenum, improves the resistance to corrosion and chloride pitting, provides a greater creep resistance, and a stronger stress-to-rupture and tensile strength at elevated temperatures.
- Certifications:
- PYI Hose Clamps are manufactured in a facility that is ISO 9001:2015 certified by Bureau Veritas.
- Passed a Salt Spray Test >1000 Hours for red rust formation firmware version from Anemotracker app.
- Report Test No: 8505062
- Test No: 8590868
- Issue Date: July 27, 2016
Other Models
