Terrova 80/MDI/IP Trolling Motor w/i-Pilot & Bluetooth - 24V-80lb-72"

Now with Built In MEGA-DI:

You can’t mark fish if you can’t see fish. And the best view of what’s below comes from Humminbird’s  MEGA Imaging™. So get a Humminbird’s eye view with a MEGA DI transducer built right into the  lower unit of our most powerful, trusted motors.

No cluttered wires, no clamps and a transducer that’s protected from the elements. Just plug your fish finder into your motor to see what’s down there. Then go catch it. 

No External Transducer - Messy wiring on an externally mounted transducer doesn’t just look bad: the transducer and wires are more susceptible to damage. With Built-In MEGA DI, the transducer is housed in the indestructible lower unit and all wiring runs through the shaft, for a clean, uncluttered look that’s protected from the elements.

Humminbird MEGA Imaging opened the eyes of anglers everywhere by taking fish finding into the megahertz frequency for the first time. Now your Minn Kota® motor can deliver crystal clear MEGA Down Imaging of what’s directly below the bow, just the way it was meant to be seen. 

In addition to MEGA Down Imaging, the Built-In MEGA DI transducer will also provide CHIRP Digital Sonar, for precise, crystal-clear returns of fish, structure and the bottom at all water levels. Sweeping multiple frequencies across a broad spectrum, this powerful tool eliminates noise for precisely defined targets. 

Lift-Assist Design: 

A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time.

Stow/Deploy Lever: 

Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly.

i-Pilot® GPS Trolling System: 

The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.

Spot-Lock with Jog: 

Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.

AutoPilot™:

Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.

Heel-Toe Electric Foot Pedal: 

Stow, deploy and adjust the trim on Terrova - all from the foot pedal. You can even activate Spot-Lock with one tap. Includes 18' cord.

Push-to-Test Battery Meter: 

Press a button on the trolling motor head to get an instant status of battery life you have left.

Digital Maximizer™: 

Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Weedless Wedge™ 2 Prop: 

With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.

Indestructible Composite Shaft - Guaranteed for Life: 

At the core of your Minn Kota trolling motor is an indestructable composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.

Mobile App Compatibility: 

Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.

Specifications

HOW TO CHOOSE THE RIGHT TROLLING MOTOR

Bow-Mount Trolling Motor - Shaft Length


Transom-Mount Trolling Motor - Shaft Lenght Guide



Engine-Mount - Shaft Lenght Guide

- Cavitation plate to waterline 13" (minimum)
- The Cavitation plate must be at least 4.5” long and 6” wide in order to accommodate an Engine Mount motor 
1= 7-1/4”
2= 3” (80EM/101EM/160EM) | 3-3/4” (55EM)
3= 13” minimum