Raymarine Parts & Accessories

Raymarine SeaTalkNG Power Cable - Right Angle - 2m (6.56 ft)  - A06070. A right angle power cable to connect a SeaTalkng backbone to a 12V switched power supply, or to connect power to an RMK-9. Part Number:  A06070 Save  $1.00  with Code

This Adaptor is used to connect a SeaTalk device to a SeaTalkngnetwork. 1m (3.28 ft) Part Number: A06073

Adapts SeaTalkNG to NMEA2000 network. For use with E and C Series Widescreen, G Series, and ST70 systems. Part Number: A06075 Save   $1.49   with Code At Checkout

Raymarine SeaTalkNG to DeviceNet (NMEA20000) Male Adaptor Cable 1m (3.28 ft) - A06076. Adapts SeaTalkNG to NMEA2000 network. For use with E and C Series Widescreen, G Series, and ST70 systems. Part Number: A06076 Save   $1.49   with Code At Checkout

Raymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers. Save $0.75 with discount code + FREE US Shipping.

This adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a RayNet Radar Cable so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an ace or gS Series multifunction display. Part Number:  A80247 Save  $3.00   with Code at Checkout

The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Part Number:  A80151 Save   $3.25   with Code at Checkout

The RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary.  Part Number: Raymarine A62361 Save $4.00   with Code At Checkout

The Raymarine RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary.  Part Number: A80006 Save $8.75 with Code + Free US Shipping

The RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run.  Part Number:  A80162 Save  $2.75   with Code at Checkout

This 90°, right angle Raymarine RayNet connector has a RayNet "Male" one end and RayNet "Female" the other. Ideal for the multifunction displays or the RMK-9 keypad to reduce the usual cable bend radius. Part Number:  A80262 Save  $1.50   with Code at Checkout

The RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.  Part Number:  A80161 Save  $3.00   with Code at Checkout