The FX-Maxx Control Display is Micro-Air's long-standing cabin control standard for both self-contained and split DX (Direct Expansion) systems and for CW (Chilled Water) air handlers. Part Number: ASY-385 Order Processing time will be 7-10 Days
The Micro-Air MAQ board is a newly-manufactured, footprint-compatible, and functionally-compatible replacement control board for the popular Q-Logic cabin control board used in marine applications. Its design, components, and reliability are superior to the OEM original. The MAQ supports all of the same displays, uses the same 6-pin RJ-12 (straight through) display cable, and the uses the same 3kohm thermistors. Fits Dometic / Cruisair QLogic control board. New board. Part Number: ASY-510-X01
The A-281C Control Board is part of a legacy DX cabin control system sold in the mid-1990s. This is a newly manufactured, footprint-compatible replacement that operates identically. The display interface can either be the legacy, 4-conductor cable with a Molex connector on each end, or it can be the newer 6-conductor RJ-12 cable with straight-through wiring. New board. Part Number: ASY-555-X0A
The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364-X07-BLUE 14-20 DAYS PROCESSING TIME
The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364-T36-IP
The 2-station Pump Relay (PRP) boards allow control of a common seawater pump between multiple cabins or chiller controls. It can also be used to control a common chilled-water loop pump between multiple chiller controls. Fully-isolated pump trigger inputs accept either 115V/60Hz or 230V/50Hz. The pump power source and pump output is also isolated and can be either 115V or 230V. Triggers not needed, integrated into the board. Part Number: ASY-110-X01
The Micro Air Easy Start 364 - ASY-364-X36-BLUE is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Important: This model will only work with units up to 18,000 BTUs when connected to 230V Part Number: ASY-364-X36-BLUE
The FX-2 Control Board is the most advanced cabin control manufactured by Micro-Air and is one of the most advanced cabin controls in the marine HVAC industry. It not only provides support for the latest FX-2 control displays, it supports all of the legacy FX-1 control displays as well (configured by jumpers). Part Number: ASY-360
Micro Air EasyTouch / Smart Touch display replacement. Dometic Smart Touch Replacement. Compatible with Dometic and Cruisair A/C Units. Intuitive icons and menus for easy use, leads you through start-up and troubleshooting. Schedule start-up & shut-down times or temperature changes. CAN Bus compatible. Accommodates Vimar Eikon, Eikon Evo bezels ( sold here ). This model is compatible with Dometic's Passport I/O Board and U-Board. 90-day warranty*. Questions? Contact us. (Wi-Fi Model Requires onboard router for dockside and open ocean use.)
The FX-1 Control Board is Micro-Air's long-standing cabin control standard for both self-contained & split DX systems and for CW air handlers. It supports the FX-1, FX-Maxx, and EasyTouch Control Displays. Part Number: ASY-375 Order Processing time will be 7-10 Days
The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364 Important: X36 model will only work with units up to 18,000 BTUs when connected to 230V
The Micro Air Easy Start 364 ASY-364-X20-IP is one of the most advanced and effective soft starters for all AC applications. It uses a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. This delivers a 65-75% start current reduction compared to a compressor's LRA (locked-rotor amperage). The Easy Start also has numerous specialized fault checks not found in any other soft starter providing even further protection for your compressor. Fits Dometic, Marine Air, Cruisair, Webasto, CTM, Flagship and most marine AC Brands. 2 Year Warranty*