MCGVLP60-230V/1PH - Low Profile - 60,000 BTUs

MCGVLP60-230V/1PH - Low Profile - 60,000 BTUs

MCGVLP60-230V/1PH - Low Profile - 60,000 BTUs

Customer ratings and reviews

MCGVLP60 "Low Profile" Modules Reverse Cycle, R410A Refrigerant, 60,000 BTUs / 230V / 1PH, DDC Control (Not Included).

MFG#: 260153010

Citimariine Store Dometic 20% Off Coupon
Save $2710.00 with Code "20ac" + Free US Shipping!



Buy Now!

Add to cart

By buying this product you can collect up to Your cart will total 1355 points that will be converted into a of $135.50 towards your next purchase! Must be to collect points.

More info

Space-Saving Chiller Design

Marine Air MCG Low-Profile Chillers are designed for locations onboard where height is an obstacle. At a height of only 18.25 in. (464 mm) for 3- to 6-ton models and 25.2 in. (640 mm) for 12.5- and 15-ton models, MCGLP units are much shorter than other chillers in the same capacity range, but no shorter on performance and reliability.


MCGLP chillers provide reverse-cycle cooling and heating and are available in capacities from 36,000 to 180,000 BTU/hr (3 to 15 tons). Individual modules can be staged for larger capacities. The MCGLP series uses R-410A environmentally safe refrigerant, which has exceptional thermodynamic properties and maximizes system efficiency.


Key benefits

  • Fits into height-restrictive spaces
  • Reverse-cycle heating
  • Stainless-steel drain pan on 36,000 - 72,000 BTU/hr models
  • Lightweight painted aluminum drain pan on 150,000 - 180,000 BTU/hr models
  • Up to six modules can be multiplexed for larger capacities
  • Up to 25% more condenser area than similar units
  • Spiral-fluted cupronickel condenser coil provides maximum heat transfer and corrosion resistance
  • Engineered to maximize the performance of R-410A, an environmentally safe refrigerant
  • Electrical box can be remotely mounted up to 6 ft. (1.8 m)
  • Removable PVC water headers resist corrosion and erosion
  • Expansion valve modulates refrigerant for improved performance
  • Hot-gas bypass to provide heating in cold seawater conditions (36,000 - 72,000 BTU/hr models)
  • Charged, tested, and leak checked at the factory
  • Meets or exceeds all applicable standards and regulation
  • Charge Guard protection provides sealed access ports, ensuring environmental protection and chiller module integrity


Technical Specifications

Capacity (BTU/h)
Voltage (V)
Cycle (Hz)
Phase (Ph)
1 or 3
Full Load Amps (FLA) Cool (A)
Full Load Amps (FLA) Heat (A)
Locked Rotor Amps (LRA) (A)
Refrigerant Type
Sound Level
Component Type
Condensing Units