By buying this product you can collect up to 13 Citimarine points. Your cart will total 13 points that will be converted into a voucher of $1.30 towards your next purchase! Must be logged in to collect points.
Victron Energy BPC121031104R BlueSmart IP65 12/10 Battery Charger 12 volt 10 Amp
Part number: BPC121031104R
Victron Energy BPC121031104R BlueSmart IP65 Charger - 12 VDC - 10AMP - 120 VAC
The Victron Energy BPC121031104R Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The Blue Smart IP65 Charger is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Other features of the BPC121031104R includes a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Victron Energy BlueSmart IP65 Charger Features
- The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Li-ion batteries are charged with a simple bulk – absorption – float algorithm.
- Will initiate charging even if the battery has been discharged to zero volts.Will reconnect to a fully discharged Li-ion battery with internal disconnect function.
- Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
- Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on
Specifications technical
Blue Smart IP67 Charger | 12/10 |
Input voltage range and frequency | 100-135 VAC 45-65 Hz |
Efficiency | 93% |
No load power consumption | 0.5W |
Charge voltage 'absorption' | Normal: 14,4V High: 14,7V Li-ion: 14,2V |
Charge voltage 'float' | Normal: 13,8V High: 13,8V Li-ion: 13,5V |
Charge voltage ‘storage’ |
Normal: 13,2V High: 13,2V Li-ion: 13,5V |
Charge current, normal mode | 13A |
Charge current, LOW | 4A |
Charge algorithm |
5-stage adaptive |
Can be used as power supply |
Yes |
Protection |
Battery reverse polarity (fuse), Output short circuit and Over temperature |
Operating temp. range |
-30°C/-22°F to +60°C/140°F (full rated output up to 40°C/100°F) Derate 3% per °C above 40°C |
Humidity |
Up to 100% |
Start interrupt option (Si) |
Short circuit proof, current limit 0,5 A Output voltage: max one volt lower than main output |
Victron Energy - Manufacturer's Information
In the Box
- BlueSmart IP65 battery charger
- Installation hardware
- Owner's manual