By buying this product you can collect up to 349 Citimarine points. Your cart will total 349 points that will be converted into a voucher of $34.90 towards your next purchase! Must be logged in to collect points.
Raymarine EV-300 Power Solenoid Evolution Autopilot
Raymarine EV-300 Power Solenoid Evolution Autopilot requires addition of a 12V or 24V Constant Running Variable Pump. MFG: T70160.
Raymarine EV-300 Power Solenoid Evolution Autopilot
*Requires addition of a 12V or 24V Constant Running Variable Pump
Features
- For vessels with solenoid controlled hydraulic steering
- Evolution Ai for superior performance
- No calibration required
- SeaTalkng Network Compatible
- ACU-300 auxiliary power to SeaTalkng network
- Includes p70Rs Autopilot Controller
Included in the Raymarine EV-300 Evolution Autopilot Kit:
- EV-1 Sensor Core
- p70Rs Autopilot Control Head
- ACU-300 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference)
- Evolution Cabling Kit
- EV Unit O-Ring Pack (set of 2)
- Wall Mounting Bracket
The EV-1 Sensor Core
At the center of every Raymarine EV-300 Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features
- Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
- Flexible installation options
- Mount above or below deck
- Simple SeaTalkng connectivity to the control head and ACU
- Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
- Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70Rs Autopilot Control Head
The p70R has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter.
Features
- LightHouse user interface is simple and quick to use
- Wide 160° viewing angles
- Start up wizard helps you configure the pilot quickly and easily
- Anti-reflective coating for improved visibility in bright sunlight
- Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
- Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
- Simple system and group dimming/illumination
- Support for multiple data sources
- SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-300 Autopilot Control Unit (ACU)
What makes the Raymarine EV300 Evolution Autopilot System "300" is the the rugged ACU-300 Actuator Control Unit, that delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.
Evolution Cabling Kit
- 1 x SeaTalkng Power Cable (0.4m)
- 1 x SeaTalkng Backbone Cable (5m)
- 1 x SeaTalkng Spur Cable (0.4m)
- 1 x SeaTalkng 5-way Connector Block
- 2 x SeaTalkng T-piece Connector
- 2 x SeaTalkng Terminator
Specifications of the Raymarine EV-300 Power Solenoid Evolution Autopilot - T70160
Steering Type | Cable/Solenoid |