By buying this product you can collect up to 118 Citimarine points. Your cart will total 118 points that will be converted into a voucher of $11.80 towards your next purchase! Must be logged in to collect points.
REVERSO Automatic Outboard Engine Flushing System 3.0 - 4 Engines - flush all outboard engines automatically in a sequence. After a single hose connection and one press of a button, the system will flush one engine at a time and shuts down after all flushing cycles are complete. Available for 4 engines set up, 12V DC. Not compatible with I/O Engines.
Part Number: 35-3864-01
REVERSO AUTOMATIC OUTBOARD FLUSHING SYSTEM 3.0 - 4 ENGINES
The solution to ushing saltwater from outboard engines and preventing corrosion.
KEY FEATURES
%20(dragged)%201.jpg)
Service Up To 4 Outboards Without The Hose Hassle
The system works whether the vessel is in or out of the water, with the engine off, and in the vertical or tilted position. The water travels from the hose, through the system, and sent to each engine for a preset time– until the last motor is used. The system automates the ushing sequence so the user does not have to connect the hose to every ushing port.
Built-In Solution To Flushing
It can be installed at the OEM level or as a retro t. Mounted on the bulkhead or transom locker, the system is permanently plumbed to each engine through the engine’s wiring loom. The system features the hose connection and starts button on the unit itself. Similar
to Version 1.5, Version 2 will also offer a separate hose connection and a waterproof start button that can be installed remotely near the transom and/or console. Minimizing the reach is a big added convenience.
SPECIFICATIONS FOR 35-3864-01
HOW TO CHOOSE YOUR AUTOMATIC OUTBOARD FLUSHING SYSTEM
Step 1 - Choose your System: a basic system to flush all outboard motors. 3' inlet hose kit is included. 
| Part # | Engine Setup |
| 35-3864-01 | 4 Engines |
Step 2 - Choose Fitting Kit:
Required: Inlet 3/4” straight and 90° elbow fitting, Outlet 3/8” and 1/2” hose barb in straight and 90° elbow fittings.
| Part # | Engine Setup |
| 35-3955-04 | 4 Engines |
Step 3 - Choose your remote switch (Optional):
to mount a remote switch in an area easier to access than the system itself.
| Part # | Harness Size |
| 35-3954-01 | 3 feet |
| 35-3954-02 | 6 feet |
| 35-3954-03 | 9 feet |
| 35-3954-04 | 12 feet |
| 35-3954-05 | 15 feet |
| 35-3954-06 | 18 feet |
Step 4 - Choose inlet hose (Optional): to mount a remote hose connection elsewhere or provide a comfortable reach to connect hose.
| Part # | Hose Kit Size |
| 35-3951-02 | 2 feet |
| 35-3951-03 | 3 feet |
| 35-3951-04 | 6 feet |
| 35-3951-05 | 9 feet |
Step 5 - Choose deck kit (Optional): can be used with inlet hose kit. Includes angled connector.
| Part # | Deck Kit |
| 35-3952-01 | With 3/4" hose barb straight fitting |
| 35-3952-02 | With 3/4" hose brb 90-degree elbow fitting |
Step 6 - Choose Faceplate (Optional): to mount a Deck Kit only, or Deck Kit and Remote Switch.
| Part # | Faceplate |
| 35-3952-07 | Deck Kit Only |
| 35-3952-03 | For Deck Kit and Remote Switch |
| 35-3952-04 | For Deck Kit and Remote Swicth 90° |
| 35-3952-05 | For Deck Kit and Remote Switch 180° |
| 35-3952-06 | For Deck Kit and Remote Switch 270° |
Deck Kit Only 
Deck Kit and Remote Switch
Deck Kit and Remote Switch 90°
Deck Kit and Remote Switch 180°
Deck Kit and Remote Switch 270°
