By buying this product you can collect up to 208 Citimarine points. Your cart will total 208 points that will be converted into a voucher of $20.80 towards your next purchase! Must be logged in to collect points.
OBERDORFER 300B-F21 Self Priming Centrifugal Pump
Part number: 300B-F21
Free Shipping to USA
Oberdorfer - 300B-F21 Centrifugal Pump - 1/3 HP - 115/230 V - 20 GPM - 32 lbs (14.5 kg) - Mechanical Seal Type
This self-priming, bronze, close-coupled style centrifugal pump is equipped with high-quality ball bearings permanently filled with grease for maintenance-free operation. The main shaft seal is a proven reliable mechanical face seal. Unlike positive displacement pumps, centrifugal pumps have larger internal spaces since pressure is generated by centrifugal force and high velocity of the liquid. These pumps can handle impurities in the liquid and the flow in the discharge line can be throttled or shut off without the need for a relief valve
Features
- Self-priming at 20' lift by suction
Heavy-duty bronze construction.
Ideal for maritime service (air conditioning, bilges and recirculation of seawater).
O-ring housing seal eliminates gasket problems
Auxiliary connections – for convenient priming and draining
Multiple mechanical shaft seal options for various applications
Pump heads mount to Nema 56J jet pump motors with standard feet
Shafts: 416 stainless
Multiple motor options, including explosion proof
For pedestal style see 30PB
Optional lifting handle
Liquids and temperatures
Capacity - Water 60°F (15.5°C) - Gallons per minute
Maximum lift without foot valve is 10 ft (3 m).
Bronze pumps are suitable for most common liquids in the pH range 4 to 11. If in doubt, consult the factory or refer to the Oberdorfer™ Chemical Resistance Guide booklet. The temperature limit for bronze pumps is 212°F (100°C). Higher temperatures are possible with fluoroelastomer or polytetrafluoroethylene (PTFE) seals. Centrifugal pumps are not suitable for pumping viscous liquids. Viscosities up to 2000 SSu can be handled, reducing performance and efficiency.
The pump seal is a mechanical carbon face type mated to a ceramic wear face for maximum durability. Other seal components are made of nitrile with low swelling characteristics for compatibility with a wide range of fluids, including many chemicals and solvents.Impulso
suction lift
Up to 22 gallons (82 L) per minute water flow and 15 ft (4.5 m) suction lift without check or foot valve (25 ft (7.6 m) suction lift with check or foot valve and a full input line). A 1/2” pipe plug at the top of the tank is for the initial fill of the priming chamber and priming of the inlet line pump is automatic thereafter.