By buying this product you can collect up to 14 Citimarine points. Your cart will total 14 points that will be converted into a voucher of $1.40 towards your next purchase! Must be logged in to collect points.
Yacht Devices NMEA 2000 Text Display YDTD-20
Yacht Devices NMEA 2000 Text Display - YDTD-20 - Instrument display for NMEA 2000 networks. Displays vessel's position, course and speed, wind and weather data, water depth, log and trip distance, engine revolutions, batteries voltage, etc. With other firmware, you can monitor up to four engines and transmissions, temperature in the exhaust system, the vessel's trim tabs, four batteries, four diesel and four gasoline tanks and three fresh water and three black water tanks.
Part Number: YDTD-20N
Reference: YDTD-20N
$149.00
Free Shipping on Orders over $99
*On Orders Over $99; Not including: Hazardous, Oversize, Greater than (+150 lbs.) or Freight Advertised Products. FEDEX Ground Shipping / Continental US Only
Shipping Calculator
Yacht Devices NMEA 2000 Text Display - YDTD-20 
YDTD - Instrument display for NMEA 2000 networks. Displays vessel's position, course and speed, wind and weather data, water depth, log and trip distance, engine revolutions, batteries voltage, etc. With other firmware, you can monitor up to four engines and transmissions, temperature in the exhaust system, the vessel's trim tabs, four batteries, four diesel and four gasoline tanks and three fresh water and three black water tanks.
Yacht Devices display is a practical choice as an additional instrument display, mounted in a cabin or near a chart table. You will not be able to configure wind or depth sensors from Yacht Devices display, but you will get the same readings as you would on displays that cost four times more.
On the actual YDTD device, a user can slide data pages very fast using the two buttons on the side of the Display. In the Display's settings, the user can turn off unused data pages and choose preferred units.
The MicroSD slot is intended for firmware upgrades. You may download firmware from our web site (two are available in Firmware Pack at this moment), copy it to the MicroSD card, and change the type of your display in a minute! We plan to release additional firmware products in the future.
The Display is not waterproof and should be mounted in a dry location. The front-mounting design requires four holes for the fixing screws and one hole for the drop cable. This allows installation of the Display in a few minutes.
Drawings
Other Models