Yacht Devices NMEA 2000 Circuit Control YDCC-04 



The Circuit Control contains four latching (bi-stable) relays, which can be managed from connected control buttons with LED indicators or over NMEA 2000 with standard messages.

The Circuit Control is the core component of Yacht Devices digital switching system. In addition to connected buttons, loads can be managed from modern chart plotters, with "virtual buttons" on the Web Gauges of Yacht Devices Wi-Fi Gateway, or automatically from Yacht Devices sensors. To set up additional control posts with duplicate physical buttons and indication, use Switch Control YDSC-04.

Key Benefits

• Compatible with a wide range of equipment, including modern chart plotterts;
• No special requirements for buttons, you can choose any momentary push buttons to match your boat's interior (see p.19 in the Manual);
• No special knowledge, software or hardware is required for installation;
• Price and size are suitable for small vessels;
• Any type of load is allowed (AC, DC, audio);
• No heating, no extra power consumption;
• Pure NMEA 2000 product, compliant to the Standard and certified by NMEA;
• High-voltage isolation with the load;
• Support firmware updates, free software for PC is available (Wi-Fi or USB Gateway is required).

Electrical Features

• Four channels: two with normally open contacts (ON-OFF) and two with switching contacts;
• Latching (bi-stable) relays consume electricity only during the process of switching and stay in their last state after the device is powered off;
• Maximum constant load current per channel is 10A, peak is 20A (4 seconds, duty cycle 10%);
• Capable of switching the direct current (DC) and alternating current (AC) loads up to 400 V;
• High voltage isolation with a load, 5000 VRMS;
• Average device consumption is only 30 mA.

Dimensions