



By buying this product you can collect up to 749 Citimarine points. Your cart will total 749 points that will be converted into a voucher of $74.90 towards your next purchase! Must be logged in to collect points.
Spectra Watermakers Ventura 150D Watermaker with Analog Control Panel - VT-150-D-12V
The Spectra Ventura series is engineered to be energy-efficient and lightweight. The compact, modular design, makes for easy installation in confined spaces. The Ventura 150 operates anywhere in the world and delivers over 6 gallons (24 liters) an hour. This system has analog controls with an instrument panel containing a feed water pressure gauge and a product flow meter.
Package Includes:
- High Pressure Clark Pump and Reverse Osmosis Membrane Module
- Analog Gauge Assembly
- Inlet Feed Pump Module with Fresh Water Flush System
- Accumulator Tank
- Manual
- Installation Fittings Kit
- 5/8" Hose (2 x 25')
System Dimensions
Service Kit
The Spectra Ventura VT-150-D Desalinator is engineered for smaller vessels to be energy-efficient and lightweight. The compact, modular design, makes for easy installation in confined spaces. The Ventura 150 operates anywhere in the world and delivers more than 6 gallons (24 liters) an hour. This system has analog controls with an instrument panel containing a feed water pressure gauge and a product flow meter.
Features:
- Spectra Ventura VT-150-D Desalinator includes installation kit with handheld salinity meter and a water sampling valve
- Designed to work in all water temps for efficient operation from the Arctic to the Equator
- Commercial-grade diaphragm pumps with run-dry protection
- Low power consumption; can be run on batteries, solar or wind power
- Whisper quiet
- Compatible with Spectra's Z±Ion system (sold separately)
- Protects membrane, filters on your Spectra watermaker
- Specifications:
- Fresh water production:
- 6.3 Gallons (24 liters) per hour
- 150 Gallons (568 liters) per day
- 9A @ 12V DC
- Power Consumption:
- 17W per gallon
- 4.5W per liter
- Pre Filters: 2.5"x10 " pleated polyester 5 micron
- Controls: Analog controls
- Installation Requirements: Dedicated thru hull, dry and well ventilated area not to exceed 110 F / 37C (Sold Separately)
- Membranes: 20" x 2.5" High rejection spiral wound polyamide
- Pump and Motor: Shurflo diaphragm pump
- Salt Rejection: 99.2 %
- Temperature Range:
- Maximum 110 degrees F / 37 degrees C
- Minimum 36 degrees F / 2 degrees C
- Baseline Conditions: 33,000 PPM feed water at 77 degrees F / 25 degrees C
- pH Range: 3-11 (typical seawater pH is 8)
- Chlorine Tolerance: 0 PPM
Specifications
- 6.3 g (24 l) every hour
- 150 gal (568 l) a day
- 60 lbs (27.22 kg)
- 12v DC 9A / 24v DC 4.5A
- 17 Watts/1 gal 4.5 Watts/1 liter
- Warranty: Spectra standard warranty
Note: The system must be connected to a dedicated 1/2" to 3/4" forward facing scoop type intake, thru-hull and seacock. A brine discharge thru-hull should be above the waterline, along or just above the boot stripe, to minimize water lift and back pressure. (Thru-hulls sold separately)