JOHNSON CM10P7-1 Mag Drive Centrifugal Circulating Pump 12V, 5/8" Hose Ports, 4.0GPM

JOHNSON CM10P7-1 Mag Drive Centrifugal Circulating Pump 12V, 5/8" Hose Ports, 4.0GPM

Customer ratings and reviews

JOHNSON CM10P7-1 JS 10-24501-03. Compact Magnetic Driven centrifugal pump with high flow rates with low electric current consumption, ideally suited for circulating water in live fish tanks, heating, and cooling systems. Designed for continuous operation with water/glycol mixture (max. 60% glycol), fresh or salt water. Liquid temperature: Min -40F (-40C) Max +212F (+100°C). 5/8" Hose Ports, 4.0GPM

More info

JOHNSON CM10P7-1 10-24501-03 Mag Drive Centrifugal Circulating Pump 12V, 5/8" Hose Ports, 4.0GPM

Extreme operational reliability, compact, leak-proof design and the capability of pumping water, antifreeze or coolants under hostile operating conditions are three of the advantages which distinguish the CM10/30 magnetic drive, seal-less pumps from
conventional alternatives. Weather-proof as well as dust-proof, the CM10 can be used in dirty or high humidity situations in vehicles or outdoor applications where the pump may be regularly subjected to road spray, adverse weather conditions or a profuse hosing down during routine maintenance.

The CM10 is well adapted for a wide range of demanding applications and operates without problem over a wide range of temperatures while reliably pumping coolants or water over extended periods of time.

Low friction impeller bearings prolong service life and make it possible for the CM10/30 to withstand dry running for up to 30 minutes. The permanently lubricated ball bearing motor also contributes to the up to 5000 hour uninterrupted service rating
of this high-tech pump.

For customized OEM solutions, such as motor vehicle heating and cooling, fresh water circulation, or closed circuit solar panels, customers can count on the SPX Johnson Pump engineering staff for specially tailored CM10 packages.

Features & Benefits:

Maximum flow @ 0,1 bar
CM10 15l/min (4 USGPM) with connection Ø16 mm (5/8”)
18,5l/min (5 USGPM) with connection Ø20 mm (3/4”)
CM30 20l/min (5,3 USGPM) with connection Ø16 mm (5/8”)
26l/min (6,9 USGPM) with connection Ø20 mm (3/4”)
Ball bearing brush motor - Enclosure IP67
Ambient operational temperature range: –40°C to +70°C
Liquid temperature range: –40°C to +100°C (-40°F to +212°F)
12V or 24V motors
IP67 classified
Ball bearing permanent magnet motor
High torque for safe starts under difficult conditions
Compact, low-weight design
Easy, low-cost maintenance and long service
CE-marked
Complies with Recreational Craft Directive 94/25/EEC: (ISO 8846), (ISO 10133)
Complies with Electromagnetic Compatibility Directive 2004/108/EC: (EN55014-1: 2006),
(EN55014-2: 1997 +A1: 2001), (EN61000-6-3: 2007) (2004/104/EC: 2004 Annex1; paragraph 6.5, 6.6, 6.8 and 6.9)

Technical specifications:

Capacity:

CM10
16 mm (⅝") port 15 l/min (4 USGPM) at 0.1 bar
20 mm (¾") port 18.5 l/min (5 USGPM) at 0.1 bar
CM30
16 mm (⅝") port* 20 l/min (5.3 USGPM) at 0.1 bar
20 mm (¾") port 26 l/min (6.9 USGPM) at 0.1 bar
Impeller: PPS thermoplastic
O-ring: EPDM
Shaft: Stainless steel
Magnet housing: PSU
Motor: 12/24V DC enclosed (as per IP67) permanent magnet, ball bearing mounted motor, designed for continuous operation
Liquid temp.: Min -40°C Max +100°C
Ports: ∅ 16 mm (⅝") or 20 mm (¾"). *Note!
CM30P7-1 available standard with 20 mm
(¾") hose connection; 16 mm
Weight: CM10: 0.53 kg (1.2 pounds),
CM30: 0.6 kg (1.3 pounds)
Body: PPA thermoplastic

Directives:

Recreational Craft Directive 94/25/EEC
(ISO 8846), (ISO 10133)
Electromagnetic Compatibility Directive 2004/108/EC
(EN55014-1: 2006), (EN55014-2: 1997 +A1:
2001), (EN61000-6-3: 2007),
(2004/104/EC: 2004 Annex1; paragraph 6.5,
6.6, 6.8 and 6.9

JS 10-24501-03