More info
General | |
---|---|
Frequency coverage Guaranteed range | 0.010–3299.999MHz* 0.010–29.999*, 50.200–51.200, |
Mode | AM, FM, WFM, USB*, LSB*, CW* * 0.01–1300MHz only. |
Usable temperature range | –10°C to +60°C; +14°F to +140°F 0°C to +60°C; +32°F to +140°F |
Frequency stability | Less than ±3ppm on the basis of 25°C (–10°C to +60°C) |
Tuning steps | 10Hz (minimum) |
Power supply | 12.0V DC ±15% |
Current drain (at 12.0V DC) Max. audio Stand-by |
0.85A typ. |
Antenna Impedance | 50Ω (BNC) |
Dimensions Main Unit Controller | (W×H×D; projections are not included) 146×41×206 mm; 53/4×15/8×81/8 in |
Weight (approx:) Main Unit Controller |
1200g; 2.6lb |
Receiver | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Receiver system | Triple-conversion superheterodyne + Down converter | |||||||||||||||||||||||||||||||||||
Intermediate frequencies |
| |||||||||||||||||||||||||||||||||||
Sensitivity (Less than) |
*1 1300.000001MHz *2 28–49.999MHz | |||||||||||||||||||||||||||||||||||
Selectivity (typical) SSB, CW, AM SSB, CW, AM, FM FM, AM FM, AM, WFM WFM |
More than 2.8kHz/–6dB More than 6.0kHz/–6dB More than 15kHz/–6dB More than 50kHz/–6dB More than 230kHz/–6dB | |||||||||||||||||||||||||||||||||||
Audio output power | More than 500mW at 10% distortion with an 8Ω load | |||||||||||||||||||||||||||||||||||
External SP connector | 2-conductor 3.5 (d) mm (1⁄8″)/8Ω |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- AD-113A/E*
- Controller cable, 3.4m; 11.2ft
- Antenna
- USB cable
- Software CD
*Depending on version
PC requirements
For use with PC control software
- Microsoft® Windows® XP/2000/ME/98SE
- USB 1.1 or 2.0
- Intel® Pentium® III 450MHz or faster
- Hard disk with at least 50 MB of free disk space
- At least 128 MB of memory (256MB or more recommended)
- Display with 1024 × 768 pixel resolution, high color
- CD-ROM or DVD drive is required for software installation
- USB audio dropouts or gaps may occur because of a lack of PC power
- Additional hard disk space is required for recording sound or storing scope data
Rear view
Please turn off the Main unit power switch when not using the IC-R1500, while installed in a vehicle. The IC-R1500 has standby power consumption that will drain the vehicle battery over a period of time.
Customer ratings and reviews