The Micro Air Easy Start 364 - ASY-364-X36-BLUE is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Important: This model will only work with units up to 18,000 BTUs when connected to 230V Part Number: ASY-364-X36-BLUE
The 2-station Pump Relay (PRP) boards allow control of a common seawater pump between multiple cabins or chiller controls. It can also be used to control a common chilled-water loop pump between multiple chiller controls. Fully-isolated pump trigger inputs accept either 115V/60Hz or 230V/50Hz. The pump power source and pump output is also isolated and can be either 115V or 230V. Triggers not needed, integrated into the board. Part Number: ASY-110-X01
The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364-X07-BLUE 14-20 DAYS PROCESSING TIME
The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364-T36-IP
The A-281C Control Board is part of a legacy DX cabin control system sold in the mid-1990s. This is a newly manufactured, footprint-compatible replacement that operates identically. The display interface can either be the legacy, 4-conductor cable with a Molex connector on each end, or it can be the newer 6-conductor RJ-12 cable with straight-through wiring. New board. Part Number: ASY-555-X0A
The FX-Maxx Control Display is Micro-Air's long-standing cabin control standard for both self-contained and split DX (Direct Expansion) systems and for CW (Chilled Water) air handlers. Part Number: ASY-385 Order Processing time will be 7-10 Days
The Micro-Air MAQ board is a newly-manufactured, footprint-compatible, and functionally-compatible replacement control board for the popular Q-Logic cabin control board used in marine applications. Its design, components, and reliability are superior to the OEM original. The MAQ supports all of the same displays, uses the same 6-pin RJ-12 (straight through) display cable, and the uses the same 3kohm thermistors. Fits Dometic / Cruisair QLogic control board. New board. Part Number: ASY-510-X01
The A-288D control board fits Dometic® / Cruisair® displays SMXht or SMXirb with technology SMXII, for SMX II controllers. Works with all SMX-II 6-pin standard control displays including the Micro-Air EasyTouch 589 (Dometic Smart Touch replacement). This control board is a redesigned, newly manufactured, footprint-compatible replacement that operates identically. Questions? Contact us. New board. Part Number: ASY-509-X01 Fits Dometic / Cruisair Part Numbers: 722300288 / 42404
The Micro Air EasyStart 368 Soft Starter is the most advanced and effective soft starter for all A/C applications. It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. Easy Start can deliver 65-75% start current reduction compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to protect your compressor further. Important: - X48 Model will only work with units from 19K to 42K BTUs when connected to 230V - X72 Model will only work with units from 43K to 72K BTUs when connected to 230V ASY-368-X48 for 30,000 to 48,000 BTU units ASY-368-X72 for 48,000 to 72,000 BTU units
The 6-station Pump Relay (PRP) boards allows control of a common seawater pump between multiple cabin or chiller controls. It can also be used to control a common chilled-water loop pump between multiple chiller controls. Fully-isolated pump trigger inputs accept either 115V/60Hz or 230V/50Hz. The pump power source and pump output is also isolated and can be either 115V or 230V . Triggers not needed, integrated into the board. Part Number: ASY-111-X01
NEW Unity U Board - Direct Replacement for the Dometic U-Board Control Board used in direct-expansion, self-contained, and chiller systems. The U board works with either 6 or 8-pin cables, and most Dometic, Cruisair, and Marine Air displays / controls. New board. Part Number: 501-09-BL Fits Dometic Part Numbers: 223100502 / 223100504
This board replaces Marine Air and Dometic Passport IO series power supplies. It supports the Passport I/O, 402-IO Control Display, and the EasyTouch OEM Control Display. New board. Replaces Dometic part number: 4220020 Part Number: ASY-400-X02 / 4220020