Raymarine Seatalk NG - Cables and Components

iTC-5 Instrument Transducer Converter,converts common Raymarine analog transducer signals (depth, speed, temp, wind, compass, rudder) into SeaTalk-ng (NMEA 2000) data. MFG#: E70010        Free US Shipping

Raymarine’s new Micro-Talk Wireless Performance Sailing Gateway seamlessly joins together wired and wireless systems enabling you to achieve all-new levels of high performance sailing. The innovative Micro-Talk Gateway can be mounted anywhere onboard and plugs into the boat’s SeaTalkng  network. Part Number: E70361 Save  $14.99 with Code   + Free US Shipping

Raymarine NMEA2000 STNG Gateway - An all-in-one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system. Part Number:  T12217 Save  $5.99 with Code   + Free US Shipping

The SeaTalk to Seatalkng converter allows select SeaTalk devices to interface and communicate on the Raymarine SeaTalkng  data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. Part Number:  E22158 Save  $4.74  with Code

The VHF NMEA 0183 to Seatalkng converter allows to connect an Isolated NMEA 0183 VHF to the SeaTalkng Network.  Part Number:  E70196 Save  $3.74  with Code

The ST1 to STNG Converter is used for connecting SeaTalk1 devices to the SeaTalking network. (converter only, cables are sold separately) Part Number:  R52131 Save  $4.74  with Code

Raymarine SeaTalkNG Power Cable - Right Angle - 2m (6.56 ft)  - A06070. A right angle power cable to connect a SeaTalkng backbone to a 12V switched power supply, or to connect power to an RMK-9. Part Number:  A06070 Save  $1.00  with Code

In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Part Number:  A06034 Save  $1.49   with Code At Checkout

In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Part Number:  A06035 Save  $1.74   with Code At Checkout

Raymarine Spur Cable for SeaTalkNG.  Save $2.24   with Code At Checkout

Raymarine Elbow Spur Cable for SeaTalkNG.  Save $1.24   with Code At Checkout

Adapts SeaTalkNG to NMEA2000 network. For use with E and C Series Widescreen, G Series, and ST70 systems. Part Number: A06045 Save   $1.49   with Code At Checkout