Raymarine’s new Micro-Talk Wireless Performance Sailing Gateway seamlessly joins together wired and wireless systems enabling you to achieve all-new levels of high performance sailing. The innovative Micro-Talk Gateway can be mounted anywhere onboard and plugs into the boat’s SeaTalkng network. Part Number: E70361
Save $14.99 with Code + Free US Shipping
Raymarine NMEA2000 STNG Gateway - An all-in-one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system. Part Number: T12217
Save $5.99 with Code + Free US Shipping
The SeaTalk to Seatalkng converter allows select SeaTalk devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems.
Part Number: E22158
Save $4.74 with Code
The VHF NMEA 0183 to Seatalkng converter allows to connect an Isolated NMEA 0183 VHF to the SeaTalkng Network.
Part Number: E70196
Save $3.74 with Code
The ST1 to STNG Converter is used for connecting SeaTalk1 devices to the SeaTalking network. (converter only, cables are sold separately)
Part Number: R52131
Save $4.74 with Code
Raymarine SeaTalkNG Power Cable - Right Angle - 2m (6.56 ft) - A06070. A right angle power cable to connect a SeaTalkng backbone to a 12V switched power supply, or to connect power to an RMK-9.
Part Number: A06070
Save $1.00 with Code
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender.
Part Number: A06034 Save $1.49 with Code At Checkout
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender.
Part Number: A06035 Save $1.74 with Code At Checkout
Adapts SeaTalkNG to NMEA2000 network. For use with E and C Series Widescreen, G Series, and ST70 systems. Part Number: A06045
Save $1.49 with Code At Checkout